Rating Summary #129,061

Sorry about the bellow, it has been trimmed a few times to fit different setups. So its not gonna fit them all. The most that could be is about 10 bucks or you are getting ripped off.

naw its the one between the TB and MAF. it pushes the lid forward and will not let the lid stay snapped in its place. THe bellow from the lid is short but works.

You should be able to trim it, or do you still have the stock one? Even if you do some trimming should allow it to sit down?

I have the stock accordian one, I tried to trim it a bit but if I cut the end collar off either of the ends go into the accordian and will not allow theh maf or the TB to go into the bellow from the looks of it. I spent quite a while trying to stuff it all together it just pushed the lid forward. Darn thing should work with the stock accordian, at least I think it should. I was almost thinking about trying to go to Home depot for a adapter hose. It may be too stiff though and not give enough bend....not sure. I am almost thinking it may be worth the 6 bucks to try before I spend 60 on a smooth bellow

I know the pipe adapter will be pretty ridgid and read where it needs to be heated to be able to fit onto the TB and Maf

What do you think?

Ive got one pic of it from a manufacturer and they used a diff bellow and it is short. I would try a home depot fix before ordering a smooth bellow for that much. Those things are way overpriced and it will need trimmed too.