LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   LS1TECH Sponsor Feedback (https://ls1tech.com/forums/ls1tech-sponsor-feedback-70/)
-   -   Shop recommendation in Washington D.C. Area? (https://ls1tech.com/forums/ls1tech-sponsor-feedback/301634-shop-recommendation-washington-d-c-area.html)

UMD_Jesse 04-05-2005 07:50 PM

Shop recommendation in Washington D.C. Area?
 
Can anyone recommend a shop in the dc area, MD or VA that can install some spohn tubular sfc's? Ive tried posting this question in the handling section a few times with no luck. The must be someone in my areas who has had this done.

fff 04-06-2005 07:15 AM

F-Body Central. They aren't a sponser here, but they are here Ask for Jason.


Originally Posted by UMD_Jesse
Can anyone recommend a shop in the dc area, MD or VA that can install some spohn tubular sfc's? Ive tried posting this question in the handling section a few times with no luck. The must be someone in my areas who has had this done.


UMD_Jesse 04-06-2005 08:07 AM

Thanks!

UMD_Jesse 04-08-2005 06:31 PM


Originally Posted by fff
F-Body Central. They aren't a sponser here, but they are here Ask for Jason.

Hey, I took your recommendation and talked to Jason at F-Body Central...He said they usually install their sfc's from a four point lift, NOT buy jacking up under the tires. Do you have sfc's and did you get them installed like this? Ive heard its not a good idea? thanks for your opinion

fff 04-09-2005 02:51 PM

I do have SFC's, and they welded them in for me. Post up on the board over there for more opinions. I would say at least 8 out of 10 people on that board have had their car in Jason's shop.

Jimm 04-10-2005 04:17 PM


Originally Posted by UMD_Jesse
Hey, I took your recommendation and talked to Jason at F-Body Central...He said they usually install their sfc's from a four point lift, NOT buy jacking up under the tires. Do you have sfc's and did you get them installed like this? Ive heard its not a good idea? thanks for your opinion

Not a good idea. You're supposed to jack the car up with a load on the suspension when putting on SFCs; which would be by a drive on lift or whatever under the tires, and loading the suspension.

ACW 04-12-2005 03:01 AM

Looks like there aren't any sponsers in that area.

You might try contacting the F-body clubs in that area, they may have more suggestions for you :)

I know of about ten, see list at https://ls1tech.com/forums/showpost....7&postcount=61


All times are GMT -5. The time now is 03:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands