|
Jantzer's quality work? Well here are the pictures of the smoothed valve covers that Scott Jantzer did for me. Notice that there is only one PCV tube. The "chrome bolts" that I paid $20 extra dollars for were actually polished and useless because they would have leaked non stop. Pits and dings all over the place, not to mention the three inch black scuff that he clear coated over. Valve covers look like CRAP and he ripped me off $245. No replies to my emails so here are the pics. TO SCOTT: AT LEAST ONE OF US KEPT UP OUR END OF THE DEAL! http://i4.photobucket.com/albums/y13...n/DSC02929.jpg http://i4.photobucket.com/albums/y13...n/DSC02930.jpg http://i4.photobucket.com/albums/y13...n/DSC02931.jpg http://i4.photobucket.com/albums/y13...n/DSC02934.jpg http://i4.photobucket.com/albums/y13...n/DSC02933.jpg http://i4.photobucket.com/albums/y13...n/DSC02932.jpg http://i4.photobucket.com/albums/y13...n/DSC02936.jpg http://i4.photobucket.com/albums/y13...n/DSC02940.jpg http://i4.photobucket.com/albums/y13...n/DSC02942.jpg I have lots more if needed. |
are those bubbles? |
Do these look like powder coating or just normal paint? |
they look like their painted. i think. |
Those look like crap, ... |
Originally Posted by A-Bomb are those bubbles? |
looks like he did it with a spray can, i'd be pissed! |
That paint job is total crap. |
yeah thats bull, those look terrible |
Those look TERRIBLE! I would not accept those if they were free. What does Jantzer have to say about it???? |
Originally Posted by 02transhawk Those look TERRIBLE! I would not accept those if they were free. What does Jantzer have to say about it???? I don't know what the deal was with the valvecovers. I had a very hard time with that color and set of valvecovers for some reason. I had to refinsh the valvecovers 4 times and I still couldn't get them to not bubble up a little. What happens is the heat from the oven opens up poors in the metal and the stock valve covers and maf ends are VERY difficult to keep from contaminating the surface. Oils etc. seep out and bubble the finish. I always bake them several times prior to coating to help with this. Usually if I have to do a couple coats, sand/prep etc. then I can pretty much get away from it. There are a few colors that are harder to get to look perfect and like chome and chrome smoke are probably the hardest. Scott |
Originally Posted by 02transhawk Those look TERRIBLE! I would not accept those if they were free. What does Jantzer have to say about it???? I thought I would be done by now. But I broke a drill bit off in my arm that has slowed me considerably. It is my goal to have the parts out by friday, so we shouldn't have a problem. I will get back with you soon. thx, Scott :supergay: |
I'd be asking for a partial refund for those. |
He did reply to my email about this thread so I will back off until the middle of next week. We'll see then. He says that he is doing another set for me. This time in black. I will keep you guys posted. |
Good to hear. Lets leave this thread alone until z28smokin's new set comes in. |
.....edited..... |
Originally Posted by z28smokin Here is another: I thought I would be done by now. But I broke a drill bit off in my arm that has slowed me considerably. thx, Scott :supergay: |
Dan, I know your frustration and was waiting for this post. Sorry it came to this for you. Bryan Fletcher parbreak |
this thread is done for now. z28smokin, PM me when you get your new VC's and I'll re-open it. maybe you all can figure out what it means NOT to bash...regardless of whether you feel its deserved or not. |
For the record I had impurities bubble up like that too four years ago. But I think a partial refund might be in order. |
| All times are GMT -5. The time now is 10:03 PM. |
© 2026 MH Sub I, LLC dba Internet Brands