good condition LS1 block, rotating assembly, heads, intake, cam and lots more parts!
12-09-2008, 08:28 PM
#1
good condition LS1 block, rotating assembly, heads, intake, cam and lots more parts! ive pulled the motor out of my 98 z28 because im building a 408. the engine ran fine when taken out and it had about 122k on it. I believe its a little bit more though because the speedo reads about 10 mph off. I think the previous owner put a different set of gears in it and never recalibrated it.
the only problem with the engine was that it was making a slight ticking sound shortly before it was removed(coming from passenger side of the motor). i was told it might be a loose rocker arm. when taking it apart everything seemed to be in excellent condition and nothing was "loose."
here is the block. like i said it is in excellent condition, no scoring on the cylinder walls or anything like that.
$325 -SOLD!
crankshaft-SOLD, rods and pistons-$125, and cam-$50.
heads are fully assembled just pulled right from the block.-$135
stock 98 LS1 intake and stock TB-SOLD
i have alot of other stock engine parts that i will sell too such as, lifters, rockers, pushrods, oil pump, etc. just ask! again this engine ran great other than a small noise which did not seem to affect anything.
If you have any questions feel free to PM me. i can get more pics of any of the parts if needed and im very negotiable on the prices.
the only problem with the engine was that it was making a slight ticking sound shortly before it was removed(coming from passenger side of the motor). i was told it might be a loose rocker arm. when taking it apart everything seemed to be in excellent condition and nothing was "loose."
here is the block. like i said it is in excellent condition, no scoring on the cylinder walls or anything like that.
$325 -SOLD!
crankshaft-SOLD, rods and pistons-$125, and cam-$50.
heads are fully assembled just pulled right from the block.-$135
stock 98 LS1 intake and stock TB-SOLD
i have alot of other stock engine parts that i will sell too such as, lifters, rockers, pushrods, oil pump, etc. just ask! again this engine ran great other than a small noise which did not seem to affect anything.
If you have any questions feel free to PM me. i can get more pics of any of the parts if needed and im very negotiable on the prices.
Last edited by gmmusclecarman; 02-14-2009 at 12:25 PM.
12-09-2008, 10:26 PM
#3
hey thanks for your interest. gimme sometime to figure out the shipping for these things since i have never had to ship anything this big and heavy.
also forgot to mention the intake will come bare without the fuel rails and all that.
also forgot to mention the intake will come bare without the fuel rails and all that.
