LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   LSX Parts For Sale (https://ls1tech.com/forums/lsx-parts-sale-45/)
-   -   Garage Sale...priced to sell! (https://ls1tech.com/forums/lsx-parts-sale/1049974-garage-sale-priced-sell.html)

TheBiz 01-17-2009 03:47 PM

Garage Sale...priced to sell!
 
9 Attachment(s)
Alright ladies and gents. It came time to clean the shop and get rid of some stuff. All prices are plus shipping and 3% Paypal. They are also OBO. We need this stuff gone. Have at it! Pictures are available of ALL the items. Just ask and ye shall receive.

Thanks!

Pictures of Exhaust Manifolds are in post #61


Vette 853 Heads - Bone Stock, untouched. $150
Oil Caps (2) - SOLD!
Stock Intake Gaskets -SOLD!
Stock Pushrods (2 sets) - Less than 15K miles $25 each
Stock Rockers - SOLD!
Stock Lifters (2 sets) - 1 set less 15K, 1 set 45K miles $40 each
Stock Valve Springs - 60K miles, Retainers and seats, no locks make offer
LS1 Coolant Crossover - SOLD!
Z06 Exhaust Gaskets (2 sets) - Square Port $20 each
LS1 Intake - SOLD!
LG Motorsports C5 Cat-Delete Pipes - SOLD!
Z06 Fuel Pump - Less 15K miles $25
LSx Front Covers - Powdercoated Anodized Blue (a few nicks) $40 for the blue
LSx Valve Covers (Center Bolt) - SOLD!
LSx Lifter Trays (6) - SOLD!
Stock C5 Mid-Pipe - SOLD!
Pile of CATS (6) - Pending
Nitrous Aviator Switch - Comes with LED and Purge Button $20
Plastic Nitrous Bottle Brackets - $20
Stock F-Body Alternator and Bracket - SOLD!
Stock 6.0L Cams (2) - Less 50K miles $40 each
Stock LS1 Cam - 02 Vette $40
Stock LS2 Cam - Single Bolt Gear Included, Less 25K miles $40
Oil Pumps (2) - Both less 25K $25
LS6 Valve Springs (3 sets, 2 yellow and 1 blue) - Include Seats, Locks, and Retainers $60 each
Stock WS6 Springs - Less 20K miles, Included isolators $50
Stock Plug Wires (14) - make an offer
Stock LSx Fuel Rail - SOLD!
Pro5.0 Stick - SOLD!
Rollermaster Cam Gear - ZERO miles, needs cleaned up $20
Stock F-body MAF - SOLD!
Uncoated LS1 Pistons w/ Rods (14) - $5 each
Coated LS6 Pistons w/ Rods (5) - $5 each
Stock LT1 Suspension Springs - 80K miles $25
Silicone Couplers (2) - 1 Black 4" 90*- $10
Exhaust Manifolds (Too many) - Z06 (2 sets), Truck (2 sets), LSx (A Lot) $25 a set for F-body, $50 a set for Truck, $75 a set for Z06
Tayolor Plug Wires - Blue, there are only 7 - Make Offer
Corsa C5 X-pipe - SOLD!
Bright White Trans Am Hood NON-RAM AIR - $100 (picked up)
LSx Knock Sensor Pig-Tails - SOLD!
PB Blaster - 1/2 Can with no Nozzle Sale Pending. :D
Duct Tape - End of Roll
Sale Pending. :D

turbowhistle86 01-17-2009 04:15 PM

I hope you are trying to be funny with the duct tape and PB blaster......

Spectre86 01-17-2009 04:31 PM

bump for justin. legit honest guy.

and for duct tape:D

Camaro98Z/28 01-17-2009 04:33 PM

email me
cadillac1997etc@yahoo.com
id like to buy your mobil 1 cap
pics would be nice
thanks!

TA4life 01-17-2009 04:46 PM

stock MAF in good shape? interested

WS.666 01-17-2009 05:51 PM

May I get some pictures of both Coolant Crossovers?

Thanks.

jhubbs 01-17-2009 05:56 PM

Could I get a picture of the alternator and bracket?

ZZebes 01-17-2009 06:59 PM

damn that's a good deal on that PB Blaster lol

1fastz 01-17-2009 08:05 PM

let me know if you have stock 98-99 fbody exhaust manifolds

Zach79Z 01-17-2009 08:23 PM

Duct tape shipped to 30736 :D

one fast zo6 01-17-2009 08:27 PM

ls1 parts
 
Stock F-Body Alternator and Bracket - $25

84ls1_transam 01-17-2009 09:36 PM

Hey you got any half used dirty coolant. Maybe some broken engine parts in it? Youre collection is worse than mine. All my friends say I'm bad. Got any pics of the nitrous switch?

TheBiz 01-17-2009 11:05 PM

1 Attachment(s)
Here are the pics you guys wanted....

TheBiz 01-17-2009 11:08 PM


Originally Posted by Spectre86 (Post 10867873)
bump for justin. legit honest guy.

and for duct tape:D

Thanks brother. Figured somebody would get a kick out of that and the Blaster. :cheers:

TheBiz 01-17-2009 11:09 PM

1 Attachment(s)

Originally Posted by Camaro98Z/28 (Post 10867883)
email me
cadillac1997etc@yahoo.com
id like to buy your mobil 1 cap
pics would be nice
thanks!

Here you go!

TheBiz 01-17-2009 11:25 PM

Alternator and MAF are gone.

TheBiz 01-17-2009 11:26 PM


Originally Posted by turbowhistle86 (Post 10867765)
I hope you are trying to be funny with the duct tape and PB blaster......

Correct sir! :D

TheBiz 01-17-2009 11:27 PM


Originally Posted by 1fastz (Post 10869011)
let me know if you have stock 98-99 fbody exhaust manifolds

I'm sure I do. I will shoot some pic tomorrow and post them here.

rnl35thss 01-18-2009 07:50 AM

:lol:I only need 8 inches of duct tape, are you willing to seperate?

TheBiz 01-18-2009 08:15 AM


Originally Posted by rnl35thss (Post 10870649)
:lol:I only need 8 inches of duct tape, are you willing to seperate?

I'll see what I can do. :cheers:

Captain InsaneO 01-18-2009 08:37 AM

This is the face of an honest guy. (In front taking it in the rear)
http://i2.photobucket.com/albums/y8/...tor8325895.jpg

mikes99camaroz28 01-18-2009 10:14 AM

Nitrous Aviator Switch
 
do you still have the Nitrous Aviator Switch - Comes with LED and Purge Button $20 if you do i want it i will pick it up asap.... mike 812-603-8570

one fast zo6 01-18-2009 02:53 PM

ls1 pats
 
payment sent!

TheBiz 01-18-2009 03:40 PM


Originally Posted by mikes99camaroz28 (Post 10871092)
do you still have the Nitrous Aviator Switch - Comes with LED and Purge Button $20 if you do i want it i will pick it up asap.... mike 812-603-8570

I do. Its at the shop. I can meet you this week sometime if you'd like.

TheBiz 01-18-2009 03:41 PM


Originally Posted by one fast zo6 (Post 10872463)
payment sent!

Got it!

TheBiz 01-18-2009 03:43 PM


Originally Posted by Captain InsaneO (Post 10870765)
This is the face of an honest guy. (In front taking it in the rear)

Thanks ass-face. :punch:

HELLBENTfabrication 01-18-2009 03:52 PM

can i get better pictures of the truck manifolds and shipping to 11566?
please pm me.
thanks
-Dan

TheBiz 01-18-2009 03:56 PM


Originally Posted by HELLBENTfabrication (Post 10872781)
can i get better pictures of the truck manifolds and shipping to 11566?
please pm me.
thanks
-Dan

You have a PM sir.

TheBiz 01-19-2009 04:28 PM

Bump...I'm open to offers. I'm also working on pictures for those of you who wanted additional ones.

TheBiz 01-20-2009 06:14 AM

Morning Bump. This stuff needs to be gone. Make some offers.

TheBiz 01-20-2009 09:25 PM

More stuff has gone. I had a busy day at work so those of you waiting on more pictures bear with me, I should have them tomorrow evening.

TheBiz 01-20-2009 09:35 PM

5 Attachment(s)
More pics guys.

Mart00SS 01-20-2009 11:43 PM

PM on Stock rockers

TheBiz 01-21-2009 06:25 AM

All PMs replied.

lw.jordan 01-21-2009 07:06 PM

close-up pics of truck mani's please? price shipped to 72801 w/paypal fees?

TheBiz 01-21-2009 10:26 PM

Manifold Pictures will be up this weekend. I'm actually going on vacation starting Saturday the 24th. You can either post in this thread, or you guys can send your PMs to Captain InsaneO.

He has access to all the parts and this thread. I will be back in town the 1st of February.
Thanks!

Captain InsaneO 01-21-2009 10:27 PM


Originally Posted by TheBiz (Post 10897346)
Manifold Pictures will be up this weekend. I'm actually going on vacation starting Saturday the 24th. You can either post in this thread, or you guys can send your PMs to Captain InsaneO.

He has access to all the parts and this thread. I will be back in town the 1st of February.
Thanks!

WOO HOO!! Prices have just doubled!!! lol

j/k.

TheBiz 01-21-2009 10:30 PM

You hear that Benny? That's the sound of people running away! :cheers:

TheBiz 01-23-2009 01:03 PM

Up again once more before I leave. If anyone needs anything, I can get stuff out tonight before 7 if I get the paypal. Thanks!

r6z4o6 01-24-2009 05:04 PM

I am in need of drivers side 02 f-body exhaust manifold with good studs and a bit of flange so i can attach my exhaust pipe to it. Any help?:D Ship to 78634

Bluchevypick 01-27-2009 07:30 PM

Im interested in 8 of the stock ls1 pistons. What you mean by uncoated??

Captain InsaneO 01-27-2009 07:33 PM


Originally Posted by r6z4o6 (Post 10914324)
I am in need of drivers side 02 f-body exhaust manifold with good studs and a bit of flange so i can attach my exhaust pipe to it. Any help?:D Ship to 78634

I will see if they want to seperate.

Captain InsaneO 01-27-2009 07:42 PM


Originally Posted by Bluchevypick (Post 10935789)
Im interested in 8 of the stock ls1 pistons. What you mean by uncoated??

Uncoated meaning they are not LS6 pistons which have the coating on the skirts. If you want them, I can have them held and shipped out on Monday, the snow storm here licks balls.

redz88 01-27-2009 07:59 PM

ls1 intake and gaskets sent to 11385

MXKidd 01-28-2009 04:37 PM

I need a driver side manifold for a 98 f-body. I'll buy both if he doesn't want to separate, but only need the one.

Shipping to 95648?

thanks

gold98Z28 01-28-2009 04:50 PM


Originally Posted by TheBiz (Post 10870705)
I'll see what I can do. :cheers:

i would like 1/4 can of pb to save on shipping:nod:

ethan071891 01-28-2009 07:11 PM

how much for 1 pair of zo6 manifolds to 27214? pm me

TheBiz 01-31-2009 04:18 PM


Originally Posted by ethan071891 (Post 10942954)
how much for 1 pair of zo6 manifolds to 27214? pm me

PM sent


Originally Posted by redz88 (Post 10935993)
ls1 intake and gaskets sent to 11385

The LS1 intake has the gaskets (intake and TB) already installed. Do you want the extra set of intake gaskets as well? I will do $80 shipped (including PP fees) to anywhere in the US. PM me for paypal addy.

TheBiz 01-31-2009 04:20 PM


Originally Posted by MXKidd (Post 10941898)
I need a driver side manifold for a 98 f-body. I'll buy both if he doesn't want to separate, but only need the one.

Shipping to 95648?

thanks

I will have pictures of all the manifolds we have by this tomorrow evening. There are quite a few, so I will need some time to go through them all and separate. I would rather not separate a "set", but I will see what we have. You may get lucky.

TheBiz 01-31-2009 04:21 PM


Originally Posted by Bluchevypick (Post 10935789)
Im interested in 8 of the stock ls1 pistons. What you mean by uncoated??


Originally Posted by Captain InsaneO (Post 10935869)
Uncoated meaning they are not LS6 pistons which have the coating on the skirts. If you want them, I can have them held and shipped out on Monday, the snow storm here licks balls.

What he said... The LS6 pistons have a teflon coating on the skirts of the piston. The LS1 piston has no coating on the skirts.

TheBiz 01-31-2009 04:23 PM


Originally Posted by HELLBENTfabrication (Post 10872781)
can i get better pictures of the truck manifolds and shipping to 11566?
please pm me.
thanks
-Dan


Originally Posted by lw.jordan (Post 10895605)
close-up pics of truck mani's please? price shipped to 72801 w/paypal fees?


Originally Posted by r6z4o6 (Post 10914324)
I am in need of drivers side 02 f-body exhaust manifold with good studs and a bit of flange so i can attach my exhaust pipe to it. Any help?:D Ship to 78634

See post above. :D Sorry for the delay. I've been on vacation.

Spectre86 01-31-2009 04:23 PM

bump for duct tape

TheBiz 01-31-2009 04:24 PM

I think I've answered all the questions and shipped everything that's been paid for. I'm back at home, so feel free to shoot me a PM.

TheBiz 01-31-2009 05:12 PM


Originally Posted by Spectre86 (Post 10960754)
bump for duct tape

Duct tape sold! Thanks brother.

TheBiz 01-31-2009 06:22 PM

Make some offers. We have a giant pile that needs to go away.

LT1Formula007 01-31-2009 06:24 PM

Slow Jack and A Ball Rub for all the remaining parts you have for sale... ;)

TheBiz 01-31-2009 06:37 PM


Originally Posted by LT1Formula007 (Post 10961360)
Slow Jack and A Ball Rub for all the remaining parts you have for sale... ;)

If I didn't need a clutch, I might think about it. :nod:

LT1Formula007 02-01-2009 01:59 AM


Originally Posted by TheBiz (Post 10961447)
If I didn't need a clutch, I might think about it. :nod:

What if I put pressure on your plate and push out your throw-out bearing until it grabs your clutch??? LMK
I may include a slow jack and a ball rub, maybe a ball tap! :D
J/k man
I need that stall you and I have been talking about. I have cash in hand!

BoostedLQ9SS 02-01-2009 06:54 AM

Got any pictures of the LSX Fuel Rails !!!

Thanks
BoostedLQ9SS

TheBiz 02-01-2009 08:01 AM

1 Attachment(s)

Originally Posted by BoostedLQ9SS (Post 10963715)
Got any pictures of the LSX Fuel Rails !!!

Thanks
BoostedLQ9SS

Sure do.

TheBiz 02-02-2009 05:10 PM

6 Attachment(s)
Here are the pics of the manifolds....

MXKidd 02-02-2009 06:07 PM


Originally Posted by TheBiz (Post 10960735)
I will have pictures of all the manifolds we have by this tomorrow evening. There are quite a few, so I will need some time to go through them all and separate. I would rather not separate a "set", but I will see what we have. You may get lucky.

ok cool, I understand if you don't want to separate. Can you
Check on shipping to 95648 on a set of 98 manifolds?

Thanks

TheBiz 02-02-2009 07:33 PM


Originally Posted by MXKidd (Post 10973488)
ok cool, I understand if you don't want to separate. Can you
Check on shipping to 95648 on a set of 98 manifolds?

Thanks

Shipping will be about $40 to anywhere in the US. These things weigh a ton. Look at the pics and let me know which set you want. I'm not entirely sure which ones are 98's. I know we have a set.

TheBiz 02-03-2009 04:25 PM

Bump...

TheBiz 02-04-2009 10:04 PM

Up up and away.

TheBiz 02-05-2009 03:06 PM

Bump. Some more stuff gone.

RADO_4U2NV 02-06-2009 10:40 PM

$125 shipped on the 853's? Hey, got to give it a shot.

TheBiz 02-07-2009 08:06 PM


Originally Posted by RADO_4U2NV (Post 11003454)
$125 shipped on the 853's? Hey, got to give it a shot.

Let me see what shipping is. PM me your zip.

3800RS 02-07-2009 08:16 PM

intake gaskets new ?

TheBiz 02-08-2009 03:36 PM


Originally Posted by 3800RS (Post 11007591)
intake gaskets new ?

Nope.

TheBiz 02-14-2009 08:24 PM

Up again Gents.

TheBiz 02-15-2009 07:09 PM

Bump.

gold98Z28 02-16-2009 03:49 AM


Originally Posted by TheBiz (Post 10889150)
More pics guys.

red silly cone cupler and intake gaskets to 45680 please. pm me your paypal.

thanks
matt moon

ps. anything wrong with gasket two from top left since its the only one that happens to be upside down in the pic. haha

TheBiz 02-16-2009 06:30 AM


Originally Posted by gold98Z28 (Post 11062707)
red silly cone cupler and intake gaskets to 45680 please. pm me your paypal.

thanks
matt moon

ps. anything wrong with gasket two from top left since its the only one that happens to be upside down in the pic. haha

PM Sent.

gold98Z28 02-16-2009 02:28 PM

payment sent

TheBiz 02-18-2009 04:29 PM

Bumpsky.

Zach79Z 02-18-2009 08:51 PM

Is it 75 shipped for one set of the yellow ls6 valvesprings?

TheBiz 02-18-2009 09:29 PM


Originally Posted by Zach79Z (Post 11083861)
Is it 75 shipped for one set of the yellow ls6 valvesprings?

No, $75 plus shipping and PayPal fees. That's what I was hoping to get out of them. All three sets have LESS than 12K miles. They are all in VERY good shape.

I'm open to offers...so let me know what you're thinking.

Zach79Z 02-18-2009 09:39 PM

Just wonder cause you can get the springs new from scoggin dickey for $57. I know you have the retainers and such also with them but i didnt really need the retainers and didnt think about that included when i posted.

TheBiz 02-18-2009 09:47 PM


Originally Posted by Zach79Z (Post 11084261)
Just wonder cause you can get the springs new from scoggin dickey for $57. I know you have the retainers and such also with them but i didnt really need the retainers and didnt think about that included when i posted.

I can do $75 shipped. I wasn't aware that they were that cheap now. SHoot me a PM if you are interested. Thanks!

TheBiz 02-20-2009 05:27 PM

Up up and away.

TheBiz 02-21-2009 09:44 PM

Up again!

TheBiz 02-21-2009 09:46 PM

New pricing on some stuff too. Need this stuff gone!

jason72076 02-21-2009 09:53 PM

i need f- body water pump and brackets
 
i need all brackets and tensioners and balancer along with water pump can you hook me up?

TheBiz 02-21-2009 10:01 PM


Originally Posted by jason72076 (Post 11103466)
i need all brackets and tensioners and balancer along with water pump can you hook me up?

I'll see what I got. You need the A/C bracket/tensioner, belt tensioner, Alternator bracket/pulley, and the water pump?

These need to work in an F-body?

TheBiz 02-24-2009 04:24 PM

Bump. I think I've gotten back to everyone. If not, please let me know. I'm not one to keep people hanging.

TheBiz 03-03-2009 09:11 PM

Up again.

TheBiz 03-05-2009 10:53 PM

Hey, bump this mother up!

TheBiz 03-07-2009 04:35 PM

Up for the day.

TheBiz 03-27-2009 03:48 PM

Ummmm....bump. Just got a set of 01 Manifolds and a set of 99 manifolds.

TheBiz 04-02-2009 03:45 PM

Up again.

pillboxesghost 04-04-2009 07:09 PM

Bump for an honest seller and a great guy to do business with!

TheBiz 04-06-2009 06:05 AM


Originally Posted by pillboxesghost (Post 11371950)
Bump for an honest seller and a great guy to do business with!

Thanks man!


All times are GMT -5. The time now is 08:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands