FS: AFR 220cc LT4's (BARE)
#1
TECH Resident
Thread Starter
iTrader: (46)
Join Date: Dec 2001
Location: Some where in the Corn Fields of Illinois
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
I bought a set of bare AFR 220cc LT4 heads from HPE about 2 months ago, but my plans have currently changed. I am planning on doing a new motor using some 18 degree heads, so these are no longer needed. These are brand new in the box, just taken out to admire them. I have pics at the links below.
Part number--- 1177
Intake runner size 220cc (as cast about 190 or so)
Any valve size will work from 2.00 and up for the intake
Any exhaust valve size from 1.55 and up
Chamber size--- 68-70cc (can be flat milled down to the mid 50's)
These are BARE heads, no port work whatsoever.
Perfect for any project like NA, FI, and N20
Spring seats are cut for 1.55 springs (can use smaller ones if you prefer)
Hi Res Pics
Low Res Pics
These heads are still on backorder as far as I know, and they normally sell around $1150 or so list.
I would like to get $975 PLUS shipping. Shipping is about $40 +/- 10
Also, if buyer pays with paypal, it is the final set price + 3%
OR
I will entertain partial/full trades for BMR K-member, BMR upper and lower control arms.........
Let me know if your interested. PM me or email me at smknta95@hotmail.com
Brian
Part number--- 1177
Intake runner size 220cc (as cast about 190 or so)
Any valve size will work from 2.00 and up for the intake
Any exhaust valve size from 1.55 and up
Chamber size--- 68-70cc (can be flat milled down to the mid 50's)
These are BARE heads, no port work whatsoever.
Perfect for any project like NA, FI, and N20
Spring seats are cut for 1.55 springs (can use smaller ones if you prefer)
Hi Res Pics
Low Res Pics
These heads are still on backorder as far as I know, and they normally sell around $1150 or so list.
I would like to get $975 PLUS shipping. Shipping is about $40 +/- 10
Also, if buyer pays with paypal, it is the final set price + 3%
OR
I will entertain partial/full trades for BMR K-member, BMR upper and lower control arms.........
Let me know if your interested. PM me or email me at smknta95@hotmail.com
Brian