Garage Sale (stock & mods)
 

Hughes Performance "Street" 4L60E (375hp) $400
408 Turbo Motor:
The setup is as follows:
6.0L Truck block
Lunati 4340 4.000" crank
Lunati Pro Mod rods
Diamond -30cc dished boost pistons
Schneider 238/238 .630"/.630" 115lsa custom cut cam
Federal Mogul bearings
Callies Billet Main Caps
ARP rod bolts and main studs
TCI Flexplate
Rotating assembley has been internally balanced, line honed, bored, and assembled.
Block has been o-ringed for .030" (i think) rings
I paid almost $4000 for the rotating assembley alone, plus $600 for the main caps, $400 for the cam, plus block, bolts, etc...
Labor into the machining and assembley about $1500
This motor is setup to run 9.0:1 w/ a 64cc head.
I was planning to make about 1200 hp with a large single on this setup, but now have gone N20
I would like to get $5000 for all of it
Garret 60-1 Turbo (needs to be rebuilt) $250

Most out of a 99 TA
Drivers side airbag - $75
Pass. Side Airbag - $100
Stock dark grey carpet - $50
Stock Drivers side seat, dark grey (w/power) - $100
Stock Pass. Side seat, dark grey (w/o power) - $75
Stock water pump - $30 sold
Stock radiator - $50 sold
Stock 853 heads - $200
Stock 706 heads - $200
Stock 317 heads - $200
Hand Ported 317 heads - $300
Stock rockers (16) - $50
Stock 5.3L shortblock (w/cracked piston) - $400
Stock NBM (non-WS6) hood (pics) - $200

Prices do not include shipping..
PM me for details or pics..

any other interior parts?

pics of motor to JesseClamp@comporium.net

what year is the 4l60e

What are you looking for?

1999

a-pillars for cheap.....need to mate the bottoms of them to my 3rd gens to finish the dash swap

I'll take the water pump. Pm sent. I would need it shipped to 92880

do you have a power steering pump?

Thats a damn good question. I switched over to a MadMan manual rack, however I cant find the pump. I think its around here somewhere unless I already let it go. I will look and let you know.

ok thanks

Wondering if you recieved the money order I sent for the radiator? Thanks!

PM sent

I am interested in carpet, is it in good shape? can you PM me some pictures

Interested in transmission, how many miles?

Still have the trans? How many miles on it? Will you ship it ?

Radiator recieved, it's in great shape, thanks!!

Carpet is in great condition, just some wear under the gas pedal from my heel. It has some stains, but I scrubbed a little Simple Green over them and they came right out, so If I get the right price, I will steam clean it before I ship it.

The transmission has 42k total miles on it. It was gone through by Hughes at 36k miles and they upgraded the clutches and valvebody. I will ship the tranny, shipping will probably be between $75-$125 for freight..

Im very interested in the transmission, and I could use the water pump too if still for sale. PMed

PM sent..

will the carpet fit a 97