LT! 383 stroker part out and tranny
#25
Discussion on engine
Alright here it goes i have a 383 stroker that i am parting out. The motor has 67 miles on it. The tranny has 60k on it stock from a '96 Z28. i have pics on here but pm me any more that you may want. i am located in Jacksonville, NC so everything will be shipped or picked up from there.
4l60 out of '96 camaro 60/k sold
stock uncut wiring harness and ecu $150 shipped
TCI 3800 stall converter part #243110 $400 shipped 67miles on this SOLD
stock throttle body w/ all sensors on it $50 shipped
stock intake manifold with all vacumm fittings and ported $85 shipped
stock alternator 60k on it $65 shipped
A/C-alternator bracket $40 shipped
stock radiator w/ tranny cooler $100+shpng
stock fuel rails w/ regulator $60 shipped
stock electric fans $100+shpng
MSD coil mounted on the coil bracket $45 shipped SOLD
MSD opti for vented app's $400 shipped SOLD
Meziere EWP w/ housing and thermo w/housing $160 shipped SOLD
comp cams 7.200" push rods $65 shipped SOLD
ATI dampner / balancer $300 shipped
Delphi 38# injectors $200 shipped
Racetronix fuel system $200 shipped NIB!!!!
Hypertech 160 deg thermo NIB SOLD
Trickflow series 1.5 and 1.6 roller rockers $225 shipped
Trickflow series 64cc 28deg heads that are P'ed and P'ed here are the #'s
2.02/1.60
.200 139
.300 198
.400 251
.500 270
.600 281
.700 283
ported by Greg Burkhart of GT racing heads. paid alot asking a reasonable price $1600 shipped add the rockers for another $125
stock valve covers $40 shipped
Trickflow series intake elbow $60 shipped SOLD
Arp 12 pt head bolts $50 shipped SOLD
used cometic head gaskets .027 thick $50 shipped
coolant line for back of heads $30 shipped
K&N cold air intake 10k miles $110 shipped
dynatech coated LT's great fitting and sounding $250 shipped will need new mergers unless you want the y pipe also but it is welded to them shipping extra SOLD
stock 02's $25 shipped
stock descreened maf $45 shipped
solid motor mounts $50 shipped
now the bottom end
4 bolt splayed block that was zero decked, line bored/honed new cam bearings freeze plugs you name this block got it. Lunatti sledgehammer 3.75"forged crank, wiseco nitrous pistons, H-beam forged 5.7" rods cloyes double roller chain, timing cover been blocked off for EWP. and ARP studs/bolts along with TCI flexplate, comp cams 236/ 242 112lsa cam. i have alot of money in this just not looking to get hosed to bad prefer pick up on this but will ship at buyers expense. $3400 +freight only 67 miles on her.
i will part out shortblock if enough people are intrested in seperate parts.
i will be adding more as i come across it. pm me with questions!
Please no ridiculous offers. i will trade for ls1 turbo stuff/ eng parts
PICS BELOW!!
http://s143.photobucket.com/albums/r...p08/?start=all
4l60 out of '96 camaro 60/k sold
stock uncut wiring harness and ecu $150 shipped
TCI 3800 stall converter part #243110 $400 shipped 67miles on this SOLD
stock throttle body w/ all sensors on it $50 shipped
stock intake manifold with all vacumm fittings and ported $85 shipped
stock alternator 60k on it $65 shipped
A/C-alternator bracket $40 shipped
stock radiator w/ tranny cooler $100+shpng
stock fuel rails w/ regulator $60 shipped
stock electric fans $100+shpng
MSD coil mounted on the coil bracket $45 shipped SOLD
MSD opti for vented app's $400 shipped SOLD
Meziere EWP w/ housing and thermo w/housing $160 shipped SOLD
comp cams 7.200" push rods $65 shipped SOLD
ATI dampner / balancer $300 shipped
Delphi 38# injectors $200 shipped
Racetronix fuel system $200 shipped NIB!!!!
Hypertech 160 deg thermo NIB SOLD
Trickflow series 1.5 and 1.6 roller rockers $225 shipped
Trickflow series 64cc 28deg heads that are P'ed and P'ed here are the #'s
2.02/1.60
.200 139
.300 198
.400 251
.500 270
.600 281
.700 283
ported by Greg Burkhart of GT racing heads. paid alot asking a reasonable price $1600 shipped add the rockers for another $125
stock valve covers $40 shipped
Trickflow series intake elbow $60 shipped SOLD
Arp 12 pt head bolts $50 shipped SOLD
used cometic head gaskets .027 thick $50 shipped
coolant line for back of heads $30 shipped
K&N cold air intake 10k miles $110 shipped
dynatech coated LT's great fitting and sounding $250 shipped will need new mergers unless you want the y pipe also but it is welded to them shipping extra SOLD
stock 02's $25 shipped
stock descreened maf $45 shipped
solid motor mounts $50 shipped
now the bottom end
4 bolt splayed block that was zero decked, line bored/honed new cam bearings freeze plugs you name this block got it. Lunatti sledgehammer 3.75"forged crank, wiseco nitrous pistons, H-beam forged 5.7" rods cloyes double roller chain, timing cover been blocked off for EWP. and ARP studs/bolts along with TCI flexplate, comp cams 236/ 242 112lsa cam. i have alot of money in this just not looking to get hosed to bad prefer pick up on this but will ship at buyers expense. $3400 +freight only 67 miles on her.
i will part out shortblock if enough people are intrested in seperate parts.
i will be adding more as i come across it. pm me with questions!
Please no ridiculous offers. i will trade for ls1 turbo stuff/ eng parts
PICS BELOW!!
http://s143.photobucket.com/albums/r...p08/?start=all
Can you call or email me to discuss this engine? Thanks. 336-255-6616.
Last edited by jersey501; 02-22-2008 at 12:00 PM. Reason: forgot number