Can someone help identify this hose?
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Jun 2008
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Can someone help identify this hose?
What is the metal flex hose that connects to the passenger side manifold? It looks as though it goes to the back of the intake manifold. I am removing the manifolds, so when my race style headers get here I can intall them. What do I do with this hose then? Is there a block off plate for it? And also, what is the best way to get this dang manifold out????? It is unbolted (what a pain), but just setting in there til tonight. Are my headers going to be that hard to install???
Thanks guys.
Thanks guys.
#2
TECH Junkie
iTrader: (31)
that's your EGR tube.
you will need EGR block off plates and have the EGR function deleted in your tune.
the manifolds will come out from the top,you have to disconnect the air tube from the manifold first before removal.
as far as header instal,well,some have it easy and some don't. you may take on a new vocabulary with a bunch of verbs,adverbs and adjectives..
you will need EGR block off plates and have the EGR function deleted in your tune.
the manifolds will come out from the top,you have to disconnect the air tube from the manifold first before removal.
as far as header instal,well,some have it easy and some don't. you may take on a new vocabulary with a bunch of verbs,adverbs and adjectives..
Last edited by 96lt1m6; 02-09-2009 at 03:12 PM.
#6
#7
TECH Addict
iTrader: (18)
just unbolt that metal tube from the car and throw it away
here are the block off plates. since your getting race style headers you will only need to use the two on the left(in the picture.) the one on the right would bolt up to your header if you had the emission style headers
http://cgi.ebay.com/ebaymotors/1993-...Q5fAccessories