o2 extension for 96 lt1. Specific Q's..
 

o2 extensions for pacesetter long tubes on a 96 lt1. (obd II)

What kind do I need? Flat 4 or the square 4.

Length for drivers side? 12" or 24"

Length for passenger side? 12" or 24"

will a casper electronic universal one from summit work?

http://store.summitracing.com/egnsea...115+4294751683

hey,

you need the flat 4.

IIRC you need one of both. but i made mine with no issues. just do a good job and there wont be any problems.

hey,

you need the flat 4.

IIRC you need one of both. but i made mine with no issues. just do a good job and there wont be any problems.

Anybody confirm this?

These are what I am using:

http://www.casperselectronics.com/st...oducts_id=1166

Obviously you need (2).

will I need two 24" or one of each?

12 will work

I ordered a pair of o2 extensions off of ebay. You need the flat 4 pin connector not the square and I have used 1 12" and 1 24" every time Ive dealt with extensions

I made my own extensions with some free plugs and wires from other GM cars in the junkyard. I'm not sure of the lengths though, its been a little while since I made'em. You will need the flat four-pin connectors.