blk96z07

I had bought a 96 parts car n im puttin in the engine in a 94?
What should I do switch the timin cover over n the opit to 94 what about the cam, timing set is all that the same?

LT1

iTrader: (1)

Are you installing the 96 LT1 engine into the 94 car?

If so...

Use the 94 LT1 PCM and engine wireing harness on the 96 LT1 engine.
Leave the 96 timing cover without removing the crankshaft position sensor.
Leave the 96 vented opti spark dont worry about swaping the cam.
Use the 96 opti spark harness.
Use the 96 LT1 rubber hose that connects to the steam pipe tube at the front of the engine.

If im forgetting anything else, im sure someone will mention it.

SS RRR

iTrader: (2)

If using a vented opti you will need to get vent hose as well as a check valve that goes from the intake, to the opti and into the intake bellows.

blk96z07

I was under that impression use the 96 engine wit my 94 pcm,harness. Then I was worried about the timing cover,opitspark.
Ty for clear the air for me! I was lost lol. Now what about vents for the opit where do I vent them to or what?

warriorcustoms

iTrader: (10)

Its a no brainer pretty much & then if you wanna do the lsx computer conversion youll already have the 96 timing cover in place & be one step ahead