So Who's Afraid Of An LS1?
 

I have already posted this in my "Stock Internals" thread, but felt it was too good to not highlight. This weekend a N/A LT1 with stock pistons, stock rockers, stock rods, STOCK CAM, and Stock Eliminator legal heads ran 7.09 @ 94 mph!! (3030 lbs)

http://i85.photobucket.com/albums/k5...1/IMG_1869.jpg

Better yet, it has an untouched stock intake and throttle body and uses 19 lb injectors!! (At 50 psi)

The car also passed IHRA tech for A/FIA and ran under the 7.25 index!

Did I mention that it was built entirely by teenagers? Am I bragging on them? Heck yeah!!

Congratulation to Jason, Caleb, Stephen and all the others who helped along the way. YOU ROCK!!

Do you mean LS1 and not LT1 they built?

by stock cam do you mean factory stock or stock elem. stock?

Bad ass ride for sure.

it has an lt1 engine, and kudos to you and the kids that helped the car along the way it turned out great

Nope.This is an LT1 car. The NHRA/IHRA lists the LT1 for 1998!

http://i85.photobucket.com/albums/k5...1/IMG_1554.jpg

I mean a bone-stock factory cam from a junk yard motor! (and, yes, we did check it)

I need to post video. This car idles around like a pick-up with the mufflers cut off!

well thats bad ass then. Just shows what a killer set of heads and a car that is set up correctly can do.

is that the IAT on the bracket in front of the TB? Running DFI setup?

The heads flowed betwean 205-210 cfm, hardly killer. But, the car is pretty trick!

Yes. We have since switched to a 1998 Ram Air set-up. The car has an Accell Gen 7 DFI.

Congrats! Glad that project with the teens turned out great.

Congrats to everyone involved!! Thats is incredible!!

sweet car

Congrats that sounds like a strong setup

Congrats..Looks like it turned out great.

videos ftw!

Very nice! :)

Very nice.

Now THATS how you teach kids to go fast. Impressive.

Great job!

Very impressive build and times Great Job! :nod:

Doesn't take a lot of power to go fast, when you got setup well :D