Green3spd

iTrader: (7)

Took the Z to two tracks this weekend. First was the local 1k ft track. Got a new PB of

1.76
7.8 1/8
10.06 @ 102

Then we headed to the 1/4 for the first time and went 1.88
8.0 1/8
10.47 1k
12.5 @ 110

I was aiming for 12.0-12.1 but only got to make one pass bc of a very unorganized event. But never the less, 10.0x in 1k has given me HIGH hopes for 9's(1k ft) in my cam only LT1

CamaroRacing12

iTrader: (5)

congrats man great times!

stryker1320

iTrader: (3)

Just out of curiosity, why are you shooting for 1000 foot time & speed?

LSWHO

iTrader: (1)

Probably cause it's his local track.

trilkb

iTrader: (4)

what cam? your mph is good for a little better then 12.5's, not bad at all though.

whytryz28

iTrader: (28)

what is a lil cam?

stryker1320

iTrader: (3)

.

Lmao, my mistake. I didn't even think about that. I guess I'm just used to the tracks around me being either 1/8 or 1/4.

SexyTransAm

iTrader: (6)

mid 12 not low.but good runs. what is the lil cam?

Rob

iTrader: (6)

I think you are going to find you need some more power to hit your goals. At least with that mph you ran with that 12.5.

TravisMcGill2000

iTrader: (2)

good times. work on that 60ft

Green3spd

iTrader: (7)

Thanks guys!

Yea, we have two locals, both 1k ft

It's a 232/239 .476/.490 112
Stock lift with 1.6 RR's

I know, I was sayin with my previous at 10.0x, I would assume I could get her down closer to a 12.1

Oh yea, I was consitant with a high 1.7x on my local track, only got 1 pass in so didn't really get to work on anything

93sspcoupe

didnt you run faster than that without hci. stock lt1 motor with bolt ons. i think you went 7.7 and 12.2 na didnt ya?

great times btw

TravisMcGill2000

iTrader: (2)

Yes sir it sure did.

TravisMcGill2000

iTrader: (2)

110 should get em there if he can get some better 60fts. i went 12.3@108

speed_demon24

iTrader: (6)

232/239 is a lil cam eh?

Green3spd

iTrader: (7)

Well it does have some duration to it but the lift is stock......

Green3spd

iTrader: (7)

Oh and BTW, my 6spd car with 6400 limiter on a 315/35-17 nitto trapped perfectly at 6300 at the 1320 with my 4.30's. I was very worried about having enough gear and it worked out perfect

CamaroRacing12

iTrader: (5)

exactly what i have ran with bolt ons so far. still got a few big bolt ons to go tho

Rob

iTrader: (6)

Big difference between A4 and M6 mph and ET. A4's always seem to be quicker at a slower mph.

I ran 12.4@111 on a 1.75 in the WS6(M6). I also ran a 12.1@111 on a 1.69 in my TTA(A4).

Is it possible to run, yes but unlikely.

3DFORMULA

iTrader: (4)

Great numbers man, lovin' that cam there.