Header Leaks, Wat Gasket do You guys use?
#1
Header Leaks, Wat Gasket do You guys use?
my headers are leakin bad around the flanges, used copper gaskets made for a lt1 made sure they were in rite, used one set of bolts with locks and they leak bad out the top of the flange. got pacesetter longtubes race version, they are in no bind at all, anyone cut their flanges inbetween the tubes?
and wat gaskets are you guys using?
thanks
and wat gaskets are you guys using?
thanks
#3
12 Second Club
iTrader: (35)
Join Date: Jan 2006
Location: Danville PA
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Ditch the copper gaskets and run Remflex Gaskets.
http://catalog.remflex.com/CHEVROLET...t_p/rf2022.htm
http://catalog.remflex.com/CHEVROLET...t_p/rf2022.htm
#4
Village Troll
iTrader: (2)
Ditch the copper gaskets and run Remflex Gaskets.
http://catalog.remflex.com/CHEVROLET...t_p/rf2022.htm
http://catalog.remflex.com/CHEVROLET...t_p/rf2022.htm
http://www.summitracing.net/parts/FEL-1406/
#5
TECH Fanatic
iTrader: (4)
Had the same issue with my Pacsetters and Copper gaskets they leaked like a god damn siv! Did some research and went with Felpro 5903 which are d port brodix style which required a small cut for the temp sensor and put them in and sealed perfect. Alot of people also use the Felpro 1406 and havent had any issues. Funny part is the Felpro's cost a 1/3 of the price of the coppers which are complete crap!
#7
TECH Regular
iTrader: (3)
Join Date: May 2010
Location: Fontana, Ca
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Fel-pros or Mr gasket ultra seal. No problems with them on my Nova & camaro.
I've ran those POS copper ones on the Nova before, leaked like a sob! Never again will I buy those expensive POS!
I've ran those POS copper ones on the Nova before, leaked like a sob! Never again will I buy those expensive POS!
Trending Topics
#11
TECH Regular
Join Date: Jul 2006
Location: Sacramento, CA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
http://shop.advanceautoparts.com/1/1...t-ms95585.html
are these any good? NAPA has them for 13 bucks.
are these any good? NAPA has them for 13 bucks.
#18
TECH Enthusiast
iTrader: (5)
Join Date: Aug 2008
Location: Middletown, DE
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
I've used the crush aluminum ones, the felpro type and percy's and I love them. I blew each gasket I had including the crush aluminum ones but my bolts came lose plenty of times. So now with the percys' and header lock bolts, they are in great condition. And these gaskets are good fro turbo setups as well.
http://www.autozone.com/autozone/acc...er=889678_0_0_
http://www.autozone.com/autozone/acc...er=889678_0_0_