build thread...good news
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
build thread...good news
So.. went by the engine shop last night to find my short block done. Just did a stock rebuild, new bearings through out, check roundness in rods, polished crank, plate honed cylinders,rings. Freeze galley ect plugs. even painted it black for me.( didn't even ask) Now for the good news. I was planning on running stock heads with my good springs, well....the stock heads needed a valve job..and my le2s were sitting there on the floor disassembled. The reason i wasnt going to use the le2s is because theyve been decked 3 times and the intake seat is about .002 from the deck. So i figured id save them for later and have the seats moved back,decked and new valves put in, well i decided to go ahead and have him start on that lastnight. So good new ill have LE2's to use for less money then i expected. Im having him cc the chambers i assuming theyre going to be pretty small.
Pics coming tomorrow.
Pics coming tomorrow.
Last edited by draggin97s10; 06-08-2011 at 02:16 PM.
#2
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking about doing LE's 224/230 or 228/236 .574/.570 110 LSA cars a six speed will most likely end up on a 26 inch tire, has 4:10s. any suggestions from you guys, car will be driven quiet a bit, and be at the track alot.
#5
******3 TEXT LINES (BLANK LINES ALSO COUNT) IS THE MAX WITH SIG PIC!!!!!! -Admin******
97 Z28 M6
Old motor 385= scrap metal
In Progress=Rebuilt 4 bolt shortblock, stock heads w/pgx springs, LE's 224/230 Cam, so far....
97 Z28 M6
Old motor 385= scrap metal
In Progress=Rebuilt 4 bolt shortblock, stock heads w/pgx springs, LE's 224/230 Cam, so far....
Trending Topics
#15
id tell you how my grind works if it ever makes it out of the driveway lol. keep hearing funky noises and to scared im gonna break somethin lol. Seems DD'able to me though. Specs in sig.
people Daily cc306 cars, just remember that.
Id go with the bigger of the 2 your looking at, because once its in the block and its running, you arnt gonna want to take it back apart.
people Daily cc306 cars, just remember that.
Id go with the bigger of the 2 your looking at, because once its in the block and its running, you arnt gonna want to take it back apart.
#18
I know, but tuning is imposable here in Eastern Canada. And I know Ion has a great mail order one for my combo. I would sooner have a great working car with old tech, then a poorly tuned car with HP left on the table.