Lawhead

iTrader: (14)

Not sure on HOW loud these should be but was told they will be louder then most RR going to recheck everything tomorrow preloaded all the rockers with 1/2 turn the car runs good and all just want to get an idea if maybe its just the rockers vs being a loose rocker other then that


Car is running great

gatorhead

iTrader: (4)

should sound relative to a sewing machine. no clacking!

TAEnvy

iTrader: (2)

mine are quiet, although when i first did them I didnt set the polylock right on a few and when they backed off they were loud as hell. I cant even here mine now over the intake, ewp, fuel pump and exhaust.

SoxXpupPeT

iTrader: (34)

They are pretty loud but tolerable. like said above. they should sound like a sewing machine.

Speed Density

iTrader: (38)

They shouldn't be "clicky" it should be a smooth sound but they are louder then OE.

Lawhead

iTrader: (14)

There isn't any clacking I wouldn't say probably just something I need to get used too

tbag_skywalker

Exactly what mine sound like.

Mystery Bird

iTrader: (7)

Mine are super quiet. They are quieter than the SA ones I used to have.

flyinZ

iTrader: (15)

Mine are louder than my old Crane Gold's.

Jpack

iTrader: (12)

As said, like a sewing machine.

madhatter

Mine were louder than stock, but there should be no clacking if they are adjusted properly.

transbird95

iTrader: (4)

Some composite valve covers quiet the noise down also. It helped on mine quite a bit over the stamped stock ones.

Speedy

I can't hear them at all. Very smooth and quiet.