Need some 7/16 stud 1.6, 1.65 or 1.7 rockers NOW
#1
Need some 7/16 stud 1.6, 1.65 or 1.7 rockers NOW
I bought some ARP 7/16 studs, some 918s, and some crane gold rockers, only to realize the cranes are wide body and wont fit. Now I need to find some narrow body rockers and dont want to spend over $150. Anybody have any lying around they want to get rid of? Or a recommendation on a set that will give me at least 10k miles before they crap out? (aka Im trying to stay away from proform)
Will standard body fit on centerbolt valvecovers or just narrow?
Has anyone run these Comp High Energy Die Cast rockers?
http://www.summitracing.com/parts/CCA-17005-16/
Will standard body fit on centerbolt valvecovers or just narrow?
Has anyone run these Comp High Energy Die Cast rockers?
http://www.summitracing.com/parts/CCA-17005-16/
#6
I'm contemplating running the skip white stainless NSA 1.6 7/16 stud rockers from eBay, I know everyone will flame for even thinking this but they are steel not aluminum, and $160, and this isn't a $6000 stroker motor, it's a $400 junkyard motor.
Tony, what are you spinning your motor to? Are you on stock springs?
Tony, what are you spinning your motor to? Are you on stock springs?
Last edited by bufmatmuslepants; 08-16-2012 at 05:20 PM.
Trending Topics
#11
Im not spending as much money on ROCKERS as I did for the entire damn engine. If I can find some Comp Ultra Pro Mags for under $200 I will jump on them, but since it is rare to come across them, I doubt I will find them in the next week which is when I need them. The Crane Golds that I have are Wide body, I havnt tried them, but they are now on Ebay. Im buying either some used Scorpions or something off here, or some Skip Whites off ebay. Or if I can find some Harland Sharps, or possibly those Comp High Energy rockers. Anybody have any experience with the Comp High Energy rockers? They are USA made but aluminum, and I dont know if I trust cast aluminum.
The Cranes are part number 11772-16 if you want to see them, they are pretty wide.
The Cranes are part number 11772-16 if you want to see them, they are pretty wide.
#14
TECH Fanatic
#16
Village Troll
iTrader: (2)
I have Crane Gold Race rockers. Not sure what you mean by "wide body" but they are housed under the stock covers and are pretty wide across. Give them a shot. You will have to trim the cross brace on the valve cover.
#17
http://www.summitracing.com/parts/CRN-11772-16/
As soon as my 7/16 studs get here Ill have to do a test fit.
#18
I'm so confused.
You are trying to save money, but instead of snipping the valve cover supports for FREE, you sell your high end rockers on Ebay to spend $160 to buy chinese knockoffs?
The crane golds will fit. I and many others have ran them just fine, you only need to snip the braces under the cover if you are on stock valve covers.
You are trying to save money, but instead of snipping the valve cover supports for FREE, you sell your high end rockers on Ebay to spend $160 to buy chinese knockoffs?
The crane golds will fit. I and many others have ran them just fine, you only need to snip the braces under the cover if you are on stock valve covers.
#19
Village Troll
iTrader: (2)
I guarantee they will work fine.
If you are running stock valve covers the only part of the valve cover that will not fit is the 90* lip on the cross brace. You can either cut it off as shown here:
http://www.chevyhiperformance.com/te.../photo_12.html
Or if you want to keep the original integrity of the cover you can just bend the 90* lip straight with a pair of pliers or vice grips.
If you are running stock valve covers the only part of the valve cover that will not fit is the 90* lip on the cross brace. You can either cut it off as shown here:
http://www.chevyhiperformance.com/te.../photo_12.html
Or if you want to keep the original integrity of the cover you can just bend the 90* lip straight with a pair of pliers or vice grips.
#20
I'm so confused.
You are trying to save money, but instead of snipping the valve cover supports for FREE, you sell your high end rockers on Ebay to spend $160 to buy chinese knockoffs?
The crane golds will fit. I and many others have ran them just fine, you only need to snip the braces under the cover if you are on stock valve covers.
You are trying to save money, but instead of snipping the valve cover supports for FREE, you sell your high end rockers on Ebay to spend $160 to buy chinese knockoffs?
The crane golds will fit. I and many others have ran them just fine, you only need to snip the braces under the cover if you are on stock valve covers.
EDIT: Just jacked the price up on ebay to $250 with a BIN of $300. If someone wants to pay that much, then it wasnt mean to be and Ill pick up some Pro Mags.
Last edited by bufmatmuslepants; 08-17-2012 at 11:05 AM.