Compstar Equivalent
Compstar Equivalent Is there something out there that is equivalent to a Callies Compstar?
Looking for:
3.75 stroke
6" rod
350 main
1 piece seal
2.100 pin
I was going to buy a compstar until I found that it is impossible to find one in that combo.
Thanks
Looking for:
3.75 stroke
6" rod
350 main
1 piece seal
2.100 pin
I was going to buy a compstar until I found that it is impossible to find one in that combo.
Thanks
GM makes a adapter to use a two piece rms crank in a one piece rms block. GM 10051118,very expensive, Moroso makes one also and it's about half the price of the GM one. Does Callies make a two piece rms crank to fit your specifications?
http://www.moroso.com/catalog/catego...?catcode=23014
http://www.moroso.com/catalog/catego...?catcode=23014
Last edited by guppymech; Sep 15, 2012 at 10:33 AM.
LoL a Google search turned up a few places One of em Speedway Motors BUT for the 900 to 1000 for a Compstar I would just pony up the 1083 for a Callies Dragonslayer!!! & if you find one cut for 5.7in rods you can still use a 6in rod 
Hope I helped a little bit
Hope I helped a little bit I prefer to stick with a one piece and for $383 more, I would defintely just go with the dragon slayer.
I've been googel seraching for over a week now. There are places that have them listed, but do not have them and cannot get them. I couldn't even tell you how many different places I have called.
I have one more call to place on Monday but I would bet they don't have one.
Thanks for the info on the 5.7 to 6" rods. i did not know that.
I've been googel seraching for over a week now. There are places that have them listed, but do not have them and cannot get them. I couldn't even tell you how many different places I have called.
I have one more call to place on Monday but I would bet they don't have one.
Thanks for the info on the 5.7 to 6" rods. i did not know that.
I got my dragonslayer 3.875 crank & Howards billet 5.85 rods from Competition Products because they had one helluva deal on the rods The crank was the same as everyone else & theyve since quit the sale but they can get em too I called Callies & If I remember right they quit orderin a lot of Compstar 1pc main stuff So if you can find one your lucky as hell Id just get the Dragonslayer & call it good
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Ohio crank has always been good for me in the past He was lookin for a Compstar replacement & at the price I found on Compstars He might as well get the Callies Dragonslayer for just a little more My Callies Dragonslayer & Howards Billet rods are a work of art!!! Almost a shame to hide em inside the block LoL I found a Callies 3.875 on a vette website for 950, if you join the site & cant remember where the hell it was to save my life LoL
My Callies Dragonslayer & Howards Billet rods are a work of art!!! Almost a shame to hide em inside the block LoL I found a Callies 3.875 on a vette website for 950, if you join the site & cant remember where the hell it was to save my life LoL 
