LT1 Coil Bracket for LS1 Coils
#22
Here's an example of the coil layout with our new line of SBC and LT1 coil bracket solutions. Notice the bottom two coil solutions are illustrated with an LT1 valve cover to demonstrate clearance near the front of the valve cover.
Our website is not yet updated to purchase these brackets. Should be online this week.
#27
You'll have maximum clearance toward the edge of the valve covers with the D514A coils. As you can see from the photo above, the D580 coils cannot move any closer toward the center of the bracket and retain the function of an oil fill cap. Send us an email (with invoice number, please) and someone can help you with an exchange.
#29
Launching!
iTrader: (14)
Join Date: Jan 2009
Location: Eden, NC
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Here's an example of the coil layout with our new line of SBC and LT1 coil bracket solutions. Notice the bottom two coil solutions are illustrated with an LT1 valve cover to demonstrate clearance near the front of the valve cover.
Our website is not yet updated to purchase these brackets. Should be online this week.
#35
On The Tree
iTrader: (1)
I currently own the LTCC Coil Conversion.
The LS1 Coil Packs are not mounted very well.
I have been looking into this bracket, but cannot find it elsewhere.
Anyone have any clue who made this bracket? I need the whole thing.
From the plate that sits on the intake to the top brackets.
or maybe someones up to making it?
The LS1 Coil Packs are not mounted very well.
I have been looking into this bracket, but cannot find it elsewhere.
Anyone have any clue who made this bracket? I need the whole thing.
From the plate that sits on the intake to the top brackets.
or maybe someones up to making it?
Josh Deubel Deubelproducts.com
#39
By chance, do you sell brackets that fit the factory GM LS valve covers? I am switching from the early 97'-98' perimeter bolt heads/covers where the LS1 coils mount directly to the cover. I am swapping in some ported 243 heads and some center bolt covers off a truck 5.3L. I have the truck coils from the 5.3L I want to use. They are the D581 truck coils. The factory bracket mounts the coils on the upper edge of the cover rather than centering them on the cover where I want them. Do you have anything?