pumasixtynine

Need help, i read up on jet fan switch to make my fans or fan to come on sooner for cooler temps! im out here in california and it gets hot especially with headers. Not overheating but just better temps.

I bought this exspensive switch, but? Guess what? I can not find water jacket plug tbat i have to remove to install switch? I looked by cylinders #6 & 8 where its suppose to be at and i cant find it? Only saw the freeze plugs. I look top to bottom and even opposite side of block? Now im stuck with this damn part but i really would like to utilize it!

Any help and or something i dont know or missing please help. I called jet and jegs but they say its suppose to be there. I think there just going off product info only. Fustrated!!! please help...

96capricemgr

iTrader: (1)

return the switch and get the pcm reprogrammed for lower temps. Money MUCH better spent.

jlpz

iTrader: (8)

I agree with 96' send it back and either get the pcm programed or buy the SLP fan switch, that's the one I run with a 160 t stat..

http://www.ws6project.com/user_stor/...trol-switch-1/

shbox

The plug is right there between 6 and 8. 5/16 square drive.

http://shbox.com/1/right_bank.jpg

IDriveChevy

iTrader: (5)

I had my pcm reprogrammed for a 160* stat and runs about 173 all day. I have a manual override switch that grounds the ecu wire out to turn either low or high fans on.

pumasixtynine

Damn i was looking down toward bottom of block, didnt know it was on cylinder head? Got it! omg thank youuuuuuuuuu!

96capricemgr

iTrader: (1)

shbox gave you good solid information that any of the rest of us could have offered but we wanted to save you from your poor choice rather than help you with it.........

pumasixtynine

Much love and appreciation for all replies, i thank you!