RealQuick

iTrader: (14)

The forum has been a bit slow lately. I figured I post some pics of something I just finished. Log manifold, 76mm, 38mm gate. Great access to plugs.

Enjoy!

Shownomercy

iTrader: (1)

Looks good, how much?

RealQuick

iTrader: (14)

Thanks. I have refined the kits to what I think is an efficient and easy to assemble setup. This hot side should support 800rwhp all day with a 7675 and M6 tranny.

Blacksix

Looks great, nice and neat. How about turning the wastegate discharge up to spit into the downpipe? Is that feasible?

RealQuick

iTrader: (14)

yes.

This one is laid out to not dump back in though, or else I would have laid the gate down. Honestly, if someone wants to push this kit to 800rwhp with the 3" DP, I'd rather not have the wastegate exhaust try to be squeezed into the already packed dp.

SwampWS6

iTrader: (7)

Man, I would pay for good plug access. When I go to the track, I'll need to have 4 jack stands because not all plugs are accessible from the top.

Very nice work btw!

RealQuick

iTrader: (14)

Thanks man. My personal car has a turbo kit from a vendor on here, a great vendor too, but my down pipe needs to be disconnected and driver's manifold needs to be removed in order to get to the plugs. PITA!

RealQuick

iTrader: (14)

Some more fun, forward facing:

RealQuick

iTrader: (14)

Cast manifolds...

RealQuick

iTrader: (14)

Forward facing log setup.

RealQuick

iTrader: (14)

PT88 Header kit with 3.5" DP

RealQuick

iTrader: (14)

Stainless kit for Jason Short:

RealQuick

iTrader: (14)

Shop car build back in the say... header kit with 76GTS.

RealQuick

iTrader: (14)

TT Fun:

RealQuick

iTrader: (14)

Headers for a LT1 T-bucket (hidden O2's). Last pic shows the mufflers that I welded into the ends of the headers:

RealQuick

iTrader: (14)

Another forward facing setup:

RealQuick

iTrader: (14)

stainless kit with a little Tnetics 7668

RealQuick

iTrader: (14)

2nd shop car kit: PT88 Header kit

RealQuick

iTrader: (14)

Utilizing SLP headers (used pair):

SwampWS6

iTrader: (7)

I remember when I first started this journey I found your website. I emailed you every other week for a couple months and got no response. You were literally the only person that kept the turbo LT1 idea alive in the community without going to a shop and getting gang raped. Lol. Then once my hotside was 90% finished you popped up again .

Only things I dislike on my setup is obviously plug access and wastegate placement. Other than that as long as it works, Im happy!