Life of a 388 bored .060 over
#2
Village Troll
iTrader: (2)
Should last just as long as a block bored .030, however it should be sonic checked before having it bored to ensure there's enough material. You doing this to go as big as possible, or is that what it's going to take to clean up cylinder walls?
#5
Registered User
Thread Starter
Join Date: Dec 2017
Location: CO
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thank you all for the replies,
I bored engine .060 because that was my option. I never asked about being sonic checked but assuming that they did. Although it was a bad idea to NOT double check.
Cooling system that I have is;
-2 row aluminum radiator
-7 blade fan/ non electric
-160 thermostat
Any recommendations on a better cooling system set up than what I have? Thanks again!
I bored engine .060 because that was my option. I never asked about being sonic checked but assuming that they did. Although it was a bad idea to NOT double check.
Cooling system that I have is;
-2 row aluminum radiator
-7 blade fan/ non electric
-160 thermostat
Any recommendations on a better cooling system set up than what I have? Thanks again!