LT1 Dyno Archive
#61
Launching!
iTrader: (2)
Join Date: Aug 2004
Location: Bay Village, OH
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Still needs to be tuned, running very rich at the moment after getting done with winter mods:
P&P LT1 heads with 1.56 & 2.0 valves
LE Ported Intake
cc306
30lb SVO's
58mm BBK TB
Pacesetter LT's
borla cat back - no plate
150 TNT wet kit & MSD 6AL
No spray #'s yet, going to dyno tune before then.
382 RWHP 360 RWTQ still needs to be tuned running pig rich
P&P LT1 heads with 1.56 & 2.0 valves
LE Ported Intake
cc306
30lb SVO's
58mm BBK TB
Pacesetter LT's
borla cat back - no plate
150 TNT wet kit & MSD 6AL
No spray #'s yet, going to dyno tune before then.
382 RWHP 360 RWTQ still needs to be tuned running pig rich
Last edited by 96blkform; 07-27-2005 at 12:37 PM.
#62
TECH Regular
Join Date: Jun 2005
Location: Leominster Massachusetts
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Hey, im really new here and have no idea what i am doing.. this is my first post..
Im getting a 1996 z28, and i am wondering what kind of mods i could do... it already has a catback flowmaster 80 series exhaust and a custom cold air intake.
i was looking to get some pacesetter long tube headers (what do you guys think about those? what are better for the price) along with the y pipe. also an ss ram air intake hood with the ram air box. i am still kind of new to camaros (i was obsessed with the vr4's but i dont have that kinda money) could some one maybe give me a good step by step on what i should do?? also what are ORY's? and what does a stall do? (sorry.. i know those are some stupid questions)
Im getting a 1996 z28, and i am wondering what kind of mods i could do... it already has a catback flowmaster 80 series exhaust and a custom cold air intake.
i was looking to get some pacesetter long tube headers (what do you guys think about those? what are better for the price) along with the y pipe. also an ss ram air intake hood with the ram air box. i am still kind of new to camaros (i was obsessed with the vr4's but i dont have that kinda money) could some one maybe give me a good step by step on what i should do?? also what are ORY's? and what does a stall do? (sorry.. i know those are some stupid questions)
#64
9-Second Club
iTrader: (1)
'96 TA, NA solid roller 383", LT4 heads & intake. 508 rwhp, torque number is bogus (like 580) due to converter flash, through an unlocked 4400 converter & 4.30 Moser 12 bolt. Didn't have time to put it back together until it was over 90 deg. Oklahoma sumers are just wonderful. Went 10.33 @ 129.70 in 3000' air. Can't wait for some decent air to run it in. Maybe 10.flat? Hope so. Still testing & tweaking.
#65
12 Second Club
iTrader: (10)
Join Date: Jul 2005
Location: MONTGOMERY,AL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
My dyno numbers
Hey guys Im new to LS1tech. But here are my dyno numbers. 346 rwhp 350 rwtq. This is a 355 with a lt4 hotcam, 1.6 R.R, ele. water pump,mac headers,full 3'' cat-back with dyna max muffler and 3'' ele cut-out,52mm tb, 32 pound inj, MSD 6al and blaster coil, tune by Ion at madz28. thru t-56.
#67
12 Second Club
iTrader: (1)
Join Date: Dec 2003
Location: Cleveland, Georgia
Posts: 3,027
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ele-blue95
Hey guys Im new to LS1tech. But here are my dyno numbers. 346 rwhp 350 rwtq. This is a 355 with a lt4 hotcam, 1.6 R.R, ele. water pump,mac headers,full 3'' cat-back with dyna max muffler and 3'' ele cut-out,52mm tb, 32 pound inj, MSD 6al and blaster coil, tune by Ion at madz28. thru t-56.
Nice numbers! I assume those are with stock heads right?
#69
12 Second Club
iTrader: (1)
Join Date: Dec 2003
Location: Cleveland, Georgia
Posts: 3,027
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ele-blue95
Yes Metalbeast these numbers are with stock heads. I have a guy selling me some ported heads with 2.00,1.60 valves for $200. What kind of gains can i hope to see?
#70
95 Z
3.89 Moser
S-10 12" converter (2500)
Comp XE 224/230
1.6 rollers
Hydra-rev
CSR water pump
Coated Pacesetter 1 3/4 LT's
Stock tb
Stock heads and shortblock
105,000 smiles
BFG's
MadZ tune
home made CAI
tb airfoil and bypass
Lucas 32# injectors (prepping for a dry shot soon)
Best 12.06 @ 113.05
1.74 60 ft. with slight wheel hop.
Track at 850 ft.
Backed up with a 12.10 @ 113.00
same 60
7.76 1/8th at 90.3
Both runs touched the rev limiter on the 2-3 shift ever so slightly. For some reason, my trans is slow going into 3rd if I start from a dig. However, if I am already moving, it will shift just fine at wot. It also shifts fine and solid at part throttle. I don't get it. I suppose there is an 11 in this car if I could solve that problem.
3.89 Moser
S-10 12" converter (2500)
Comp XE 224/230
1.6 rollers
Hydra-rev
CSR water pump
Coated Pacesetter 1 3/4 LT's
Stock tb
Stock heads and shortblock
105,000 smiles
BFG's
MadZ tune
home made CAI
tb airfoil and bypass
Lucas 32# injectors (prepping for a dry shot soon)
Best 12.06 @ 113.05
1.74 60 ft. with slight wheel hop.
Track at 850 ft.
Backed up with a 12.10 @ 113.00
same 60
7.76 1/8th at 90.3
Both runs touched the rev limiter on the 2-3 shift ever so slightly. For some reason, my trans is slow going into 3rd if I start from a dig. However, if I am already moving, it will shift just fine at wot. It also shifts fine and solid at part throttle. I don't get it. I suppose there is an 11 in this car if I could solve that problem.
#71
This is my first post on here!
'95 Z28 M6 130k miles when dyno'd:
G2 cold air/k&n
cutout
TB bypass
267rwhp/304rwtq Dyno sheet
Made two runs out at TX Motorplex in Ennis when I first bought it and missed 3-4 shift both times! I think I pulled 14.4's out of both of 'em with horrible 60'.
'95 Z28 M6 130k miles when dyno'd:
G2 cold air/k&n
cutout
TB bypass
267rwhp/304rwtq Dyno sheet
Made two runs out at TX Motorplex in Ennis when I first bought it and missed 3-4 shift both times! I think I pulled 14.4's out of both of 'em with horrible 60'.
Last edited by aggie95z28; 08-04-2005 at 01:19 AM.
#76
11 Second Club
iTrader: (6)
Originally Posted by Chrism400
Both runs touched the rev limiter on the 2-3 shift ever so slightly. For some reason, my trans is slow going into 3rd if I start from a dig. However, if I am already moving, it will shift just fine at wot. It also shifts fine and solid at part throttle. I don't get it. I suppose there is an 11 in this car if I could solve that problem.
#77
TECH Enthusiast
iTrader: (2)
Join Date: Aug 2005
Location: Chicago
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lafnlt1
562rwhp 675rwtq on a 150 hit only
soon to what it does on a 300 hit
soon to what it does on a 300 hit
Hey that combo sounds pretty interesting! wat's it consist of? you have any pics of the setup?