Stall and Nitrious?
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Jan 2005
Posts: 305
Likes: 0
From: Las Vegas.. back in san jose..
Stall and Nitrious? ok so im looking for a next mod(s)..and im think a 3600 stall and a nitrious kit..do u guys think thats good mod list considering my mods...which are really not much...or should i be looking at a cam and headers...or something else??? my car is a 93 with 80K........or should i go full suspension to get the power i do have to the ground???
Last edited by whilte93lt1; Apr 27, 2005 at 03:11 AM.
11 Second Club
Joined: Oct 2002
Posts: 895
Likes: 0
From: Austin, TX
a convertor and gas will be a great advantage to you. With the 3.23 gears you shouln't have too much of an issue planting the rear, but some suspension upgrades will be needed soon. Especially if you plan on going to a 3.73 or 4.10 gear.
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Jan 2005
Posts: 305
Likes: 0
From: Las Vegas.. back in san jose..
yea...well i thnk at most i would go 3.73 gears, and i was thinkg getting some LCA's and some other things....and would lowering my car be worst for racing>????..ive heard that it is??
Trending Topics
11 Second Club
Joined: Feb 2005
Posts: 159
Likes: 0
From: Amite, La
In my opinion, I would look into the camshaft and the converter first. After a while when you can get the gas, headers, gears and tires, you will appreciate that the cam and converter are already done.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
12 Second Club
Joined: Feb 2003
Posts: 167
Likes: 0
From: Minneapolis, MN
Make sure you get a stall designed to work with nitrous. PI will set you up with a stall that is built to your current/future mods. That's what I did, since I plan on spraying later on this summer, and then building a high comp bottle baby.
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Jan 2005
Posts: 305
Likes: 0
From: Las Vegas.. back in san jose..
Originally Posted by skinnies
Get a good set of tires(m/t drag radials 
) and it should run good with the stall/spray.
) and it should run good with the stall/spray.