Pic's of my new heads... UPDATE!!!
 

Finally came in friday.. They're all pro 245rr's going to be converted to Rev. Cooled.. They'll be sitting on a 396...
http://www.streetsleepers.com/stevepics/allpro1.JPG
http://www.streetsleepers.com/stevepics/allpro2.JPG
http://www.streetsleepers.com/stevepics/allpro3.JPG
http://www.streetsleepers.com/stevepics/allpro4.JPG
http://www.streetsleepers.com/stevepics/allpro5.JPG

BTW Don't mind my buddies wife's leg's.. ;)

Nice heads, you aint messinga round. your buddies wife has some hairy legs, but if thats his thing who am I to judge :)

Looks Sweet!

:devil:

what do those things flow

They don't yet.. after porting i'm expecting 350ish in the .600 range...

Please keep us posted on the flow numbers I'm very curious 350 @ 600 is a high goal.

Good luck.

:eek2: wow, and what size cam? what are the rest of your mods? Sounds like a terror

I saved those pics to my porn folder.

It's ok.. My guesses are educated.. :) here's a set ron's porting did...
http://www.ronsportingservice.com/im...lpro-specs.htm

As far as the cam goes.. it's gonna be a solid roller spec's haven't been finalized as of yet till the final cut has been done on the heads.. But it'll be big.. :)

For the porn guy.. Kicked my girl out of the bed.. and the heads get her pillow.... :drive:

you, sir, are a god among men.

The heads look great but the damn hairy legs blew up my video card!

J

lmfao thats awsome :jest:

Here's a update.....
Got a email from Dennis At AFD he's doing the conversion and porting.. Did a lil work on the master port and out of the box the heads pulled 256cfm.. lil massaging and they're already upto 342 and still have quite a way's to go... Should have some more info later next week.. After my kidney sell's.. :devil:

http://www.streetsleepers.com/stevepics/port.jpg

a thing of beauty!!!!!!!!!

Sweet heads!!!

Great flow numbers so far!

Mike

Going to be an evil setup man :devil:

I'm using the same heads for the engine I'm building right now. I've just finished the conversion, and I'll be sending them back to All Pro for finish machining and the CNC work sometime next week. Looks like we'll both be making some good power when our projects are completed.

Good luck, and keep us posted.....

Nice.. :) keep us posted on progress.. what motor are they going on? Care to endulge any details? :hail:

Who's doing the cam??? if you want a recommendation Lon at secondstreetspeed in PA spec'd out and custom ground my solid roller for my 383.... 248/260 .704/.685 114.5lsa nitrous cam.... He'd at least give you his recommendations.... when i first looked at the heads I was like "I hope he's gonna port those mofo's cause the castings looked rough as hell".... glad to see you're gonna port the hell out of em...

My AFR 227's did like 310cfm and 235 at .650 CNC ported by AFR..... going to be slapped on a serious nitrous motor.... what is the rest of your setup... sounds like a monster like mine.... 06 looks like a good year for some serious builds...

care if you tell me what you paid for em after everything? Porting and reverse cool setup plus cost of castings????