LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   LT1-LT4 Modifications (https://ls1tech.com/forums/lt1-lt4-modifications-31/)
-   -   Problem (https://ls1tech.com/forums/lt1-lt4-modifications/524000-problem.html)

MillerT/a 06-12-2006 01:27 PM

Problem
 
When im driving in the 30-65 range and I press the gas down about middle my car starts to jump and acts like its about to shut off. One time at about 40 i was doing it just to see what it would do and the car shut off for about 2 seconds and i had no response then it immediately turned back on. The car is a 93 trans am. Just got my wires and plugs redone about a month ago. Any help is greatly appreciated.

borninatransam 06-12-2006 01:43 PM

opti could be goin out. 93s and 94s had un-vented optis and had problems with overheating them and cracking and moisture build up. just something i would check out first

the_merv 06-12-2006 02:12 PM

Check the Opti first. Does it respond fine, like it has power? If not, could be the Fuel System...

MillerT/a 06-12-2006 02:18 PM

...
 
Its fine if I floor it but if i baby it and try to ease the gas from 35-70 it starts to shake and act like its misfiring. If its the opti how much should i expect to pay and on a scale of 1-5 how hard is it to do yourself? Thx guys for the help.

imnotplutonium 06-12-2006 02:25 PM

sounds like the opti. my car did the same thing. Took it to a shop, this is before I knew too much about the lt1, and they changed everything except the opti and told me my msd ignition coil was bad. cost me more than I'd like to say. one day when it was doing it I got pissed and floored it, it took off until the opti like exploded and the car shut off and I coasted into a domino's. finally after me telling them to check the distrubutor multiple times they changed the opti and it ran awesome. I then put my msd ig. stuff back on and it ran great. so apparently they didnt know or they just took advantage of a unsuspecting high school guy.

MillerT/a 06-12-2006 02:26 PM

...
 
How much should i expect to pay for a new opti so I know the price range and dont get ripped off?

imnotplutonium 06-12-2006 02:32 PM

if you have the money I'd look into the alternatives. dynaspark or the lmcc... i think that is it. if you dont have the money to do those the opti itself is still a bit pricey. cant seem to remember how much mine was. few hundred im sure

MillerT/a 06-12-2006 02:41 PM

Did you install this on your own or have someone else install it?

imnotplutonium 06-12-2006 02:44 PM

i didnt do it. dont have the garage nor the tools. heard it is not very fun though :(

the_merv 06-12-2006 03:36 PM

Yea, I hear ya. It's nice to have a place to work on your stuff. I have all the tools, hope I can find a place with a Garage when I get back. Get yourself a little 100 piece Standard/Metric Wrench and Socket set. I can tear apart my whole car almost with the one I bought.

MillerT/a 06-12-2006 04:43 PM

So is there anything else I will need if im gonna buy Baileys LTCC setup?

harvickgm 06-12-2006 05:03 PM

its the opti... i have a 93 and mine is doing the same exact thing... is your an M6 or auto?? now im just waiting to get time to put the new MSD on...

MillerT/a 06-12-2006 05:21 PM

mines A4. Im hoping this is all it is. Cant think of life w/o my baby :D. Hopefully can get ahold of a camera so i can post some pics.... just got my new rims on. 18 inch c6 rims on front 18.5 on back i love em lol. Just wish i could get this stuff sorted out.


All times are GMT -5. The time now is 01:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands