94'BLKBRD

iTrader: (76)

I recently got the gm847 cam done on my car now I don't know what size stall I should get??? I was thinking of getting the fuddle 3000 performance series....but I would like to hear some opinions of you guys that are running a similar cam(gm847) or BIGGER cam then me......is 3000 to low or should i go bigger???

and im getting my tranny rebuilt at Toy Shop in Pomona so the transmission is going to hold up to 600rwhp.

3pnt4maro

iTrader: (2)

im running a similar cam and EDGE suggested a 3200 stall and thats what i went with..i suggest going no lower than a 3000

96lt1m6

iTrader: (31)

3200-3800

95FbFormula

iTrader: (25)

I would go with a 3600 higher then 32 but not to high

BizZzatch350

iTrader: (33)

3600 Vigi would be good, I run a 3200 in my bolt car, drives fun

Out1aw

iTrader: (1)

I'd personally run a 3500 or 3600 with that cam, and a set of 3.73s at least. But you could potentially run a 3200 and be fine. But as 3pnt4maro said, no lower than 3000!

93-vr4+transam

iTrader: (1)

I run the fuddle hp3800 stall with my cc306 cam, and love it, streetability is not a issue. plus you will be in your cams powerband when you hit the big right pedal...lol...

daniel6718

iTrader: (36)

id say at least 3200 and 3.73 or 3800 with stock gears...id do 3.73 or the car wont feel that great down low when it hooks...goana bog

mySlowLt1

I had a vig 2800 in a 383 with that cam and it was fine. Stock cubes i would go 3500, Hell that is what im geting mine stalled at now.

Wildwillz28

iTrader: (2)

ive got a vig 3200 with the 847 cam and its not enough id say about a 3600+

carzman5678

I got a 3000 stall in my car. It is perfect in my opinion.

foggedz

iTrader: (1)

I would get at least a 3800. Dont believe any of the hype about big stalls being bad on the street. I have a 4000+ non lockup converter, th350 trans, and it drives just fine on the street.

94'BLKBRD

iTrader: (76)

im going with the FUDDLE 3400 performance series

koolaid_kid

iTrader: (21)

Good choice. I run it, and I like it a lot.

LS1 Eddie

iTrader: (2)

Yank SS3600

mumu_624

iTrader: (1)

Are you running a 847 with stock heads??? hows it run??

streetwarrior96

Vig or Yank 3500 stall

94'BLKBRD

iTrader: (76)

yes im running it with stock heads..........I haven't driven it because it needs a tune.Im getting my pcm back from pcmforless on wednesday,so i'll let you know how it runs

Javier97Z28

iTrader: (1)

Revving it to 6800+ like you should be?

Then Yank PT4000 or go home

IllusionalTA

iTrader: (9)