HP and ET guesstimates w/ LUNATI 232/242
08-13-2007, 11:33 AM
#1
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
HP and ET guesstimates w/ LUNATI 232/242 Lunati 232/242 .510/.525 110 LSA, 1.5 roller rockers, RPM Air-Gap intake, 750HP holley. Hedman LT's with 2-1/2" x-pipe and dynomax bullets, VORTEC Heads-UNtouched with 918 Beehives and TITANIUM Retainers.
1985 IROC with T5 tranny. 3400lbs max with driver. I will do whatever I got to do to get that raceweight. I will be running 26X10.5 ET STREETs on Weld rims.
I will be comparing my UNported heads to my Ported heads next season.
I also have a spare tranny so I am not afraid to break this one.
I would really like to hear from you LT1 guys what you think it will dyno on the CHASSIS dyno and what will ET and MPH with a LOW 1.6 or HIGH 1.5 60"?
thanx guys.
Also have lakewood LCA's
PS. I have seen 330rwhp with a HOT cam and shortie headers with an E-brock 600 thru a T5 and 355 with ETEC 170's.
1985 IROC with T5 tranny. 3400lbs max with driver. I will do whatever I got to do to get that raceweight. I will be running 26X10.5 ET STREETs on Weld rims.
I will be comparing my UNported heads to my Ported heads next season.
I also have a spare tranny so I am not afraid to break this one.
I would really like to hear from you LT1 guys what you think it will dyno on the CHASSIS dyno and what will ET and MPH with a LOW 1.6 or HIGH 1.5 60"?
thanx guys.
Also have lakewood LCA's
PS. I have seen 330rwhp with a HOT cam and shortie headers with an E-brock 600 thru a T5 and 355 with ETEC 170's.
Last edited by moge11; 08-13-2007 at 11:46 AM.
