egr delete question!!
#21
Launching!
Thread Starter
Join Date: Mar 2008
Location: Academy,Tx (home of temple/academy Drag Strip)
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
ok well i just looked up some on ebay and why is there 3 of the plates? i thought u only block off 2 holes? anyone know this
#22
TECH Fanatic
iTrader: (9)
Join Date: Mar 2006
Location: N. Richland Hills
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
One is supposed to go on the exhaust manifold that you will be replacing and will not need the 3rd one. They have to sell that one just in case someone is not replacing their manifolds.
#24
Launching!
Thread Starter
Join Date: Mar 2008
Location: Academy,Tx (home of temple/academy Drag Strip)
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
i get all of it , the metal pipe goes under the front of the motor right kinda like under the water pump?
and i still dont understand what clip the Solenoid Connector, and put a Vacumn Cap on the Intake where the Rubber Line came off.
what kind of clip?
and what kind of vacumn cap?
and i still dont understand what clip the Solenoid Connector, and put a Vacumn Cap on the Intake where the Rubber Line came off.
what kind of clip?
and what kind of vacumn cap?
#26
Launching!
Thread Starter
Join Date: Mar 2008
Location: Academy,Tx (home of temple/academy Drag Strip)
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
so is it actually worth taking all the egr/air stuff off , besides the clutter in the engine bay? does anyone have their egr/stuff still hooked up on the headers and didnt delete their egr/air
#27
TECH Fanatic
iTrader: (9)
Join Date: Mar 2006
Location: N. Richland Hills
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Yes it's worth it if you don't have to pass emissions. The clip comes out of the EGR solenoid and the lines that go to the solenoid come out of the intake manifold and need to be capped with a vacuum cap. You can even ghetto rig some tape on that small fitting and you'll be fine.
#30
Launching!
Thread Starter
Join Date: Mar 2008
Location: Academy,Tx (home of temple/academy Drag Strip)
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Also since I'm gettin headers and delting my egr/air and o2, where can I get my car tuned at?
And will I have to get bigger fual injecters for the longtubes?
Will my car be running to lean with longtubes?
And will I have to get bigger fual injecters for the longtubes?
Will my car be running to lean with longtubes?
#32
dude chill out man...
This is SOO easy its ridiculous. OK-
1)block off (with 2 plates) the rear of the intake
2)get a simple vaccuum nipple to plug over the vac. hose that used to go from egr-intake.
3) take off air pump (3 bolts,1 connection) and all associated air tubing (black tubing, chrome tube going to pass. side of motor)
its really that easy..
This is SOO easy its ridiculous. OK-
1)block off (with 2 plates) the rear of the intake
2)get a simple vaccuum nipple to plug over the vac. hose that used to go from egr-intake.
3) take off air pump (3 bolts,1 connection) and all associated air tubing (black tubing, chrome tube going to pass. side of motor)
its really that easy..
#33
#34
#35
#37
Launching!
Thread Starter
Join Date: Mar 2008
Location: Academy,Tx (home of temple/academy Drag Strip)
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Ok well is the vacumn the one that's behind the coil pack that's hooked up to the optispark? If so that's not gonna get moisture in the opti?