new project..
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Apr 2008
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
new project..
Ok i almost have every part for the new car, this is what is going in next weekend as long as UPS is on time. What do you think?
Refreshed engine..rings,bearings, timing chain
Refreshed stock heads...3angle valve job, gasket matched (lil hand porting)
Crane Valve springs good to .640
Crane RR 1.5's
custom grind cam (242 252 .594 .594 lsa 108)
Pasesetter longtubes
KnN CAI with airfoil
new plugs and wires, all gaskets
Th350 manual VB
3600 stall
i plan to start friday night and start the car up sunday afternoon.
Refreshed engine..rings,bearings, timing chain
Refreshed stock heads...3angle valve job, gasket matched (lil hand porting)
Crane Valve springs good to .640
Crane RR 1.5's
custom grind cam (242 252 .594 .594 lsa 108)
Pasesetter longtubes
KnN CAI with airfoil
new plugs and wires, all gaskets
Th350 manual VB
3600 stall
i plan to start friday night and start the car up sunday afternoon.
#6
12 Second Club
iTrader: (21)
Join Date: Jan 2007
Location: Dothan AL for now
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
I might have missed it but what kind of tune you going with? Goodluck with the build up should be fun. Who rebuilt the heads and bottom end? Now all you need to do is throw some nitrous at it!!!!
Trending Topics
#9
Launching!
Thread Starter
iTrader: (7)
Join Date: Apr 2008
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
i bought the cam used for a good deal, the guy said he made awsome power with same type of head setup, But it will be a madz28 tune to get the car going until i can get down to sealevel for a dyno tune.