Who's using sfi/blowproof bellhsngs?
#1
Who's using sfi/blowproof bellhsngs?
I have heard of some problems with the mcloed unit.i am looking at the quick time set up.it freaks me out to leave the line at 6850rpm with no protection.i am running a blanket now but would like any input on these set ups.'72ss camaro ls1,6sp,ms3,stg2.5 5.3's,fast92/92,4:11's ect.470rwh.
Last edited by wantsum410; 11-25-2008 at 10:10 PM. Reason: MISPELL
#2
TECH Fanatic
iTrader: (1)
Join Date: Jun 2003
Location: Mount Dora, Fla
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
I've had a McLeod scatter shield for almost 3 years, no issues. What convinced me to make the change was that I saw a car where the clutch exploded, it cut through the headers, floor board, dash and windshield. The OEM bellhousing is < 1/8" thick cast aluminum vs 1/4 " steel plate.
Fitment takes a little time, but not difficult. You have to grind down the back of the oil pan but it's no big deal. Do get a self bleeder when doing the project, makes life alot easier.
Fitment takes a little time, but not difficult. You have to grind down the back of the oil pan but it's no big deal. Do get a self bleeder when doing the project, makes life alot easier.