Monster Clutch Co. Twin Discs!!!!!!
07-16-2010, 06:30 PM
#1
Monster Clutch Co. Twin Discs!!!!!! FINALLY!
We've already known it will hold and take abuse, we've just finally got all the small "little" things that people usually bitch about taken care of (I.E. floater plate rattle, misc. noises, engagement, etc.)!
We'll be officially offering these in three flavors for the 12" units and two for the 11" guys making stupid power; pricing will depend on what my machinist sends me on Monday. Once we get that then I'll sign off on full production and it's on!
I just got back from driving a car we put our Ceramic 12" twin disc in and all I can say is HOLY SH*T!!!!! This thing will be rated at 1250hp/tq and me and six other guys here at the shop could NOT get this thing to chatter! It's as smooth as a stock clutch, hell we were letting out the clutch at idle without chatter! The best part is you'll get all this and it will hold HUGE power!
We're excited to say the least! 19 months and investing way too much money to even think about and we finally nailed it!!!!
I'll post this on more forums and on Monday expect concrete pricing, timeline of production, and PICTURES!
Steve A.
We've already known it will hold and take abuse, we've just finally got all the small "little" things that people usually bitch about taken care of (I.E. floater plate rattle, misc. noises, engagement, etc.)!
We'll be officially offering these in three flavors for the 12" units and two for the 11" guys making stupid power; pricing will depend on what my machinist sends me on Monday. Once we get that then I'll sign off on full production and it's on!
- 12" Carbon Organic Twin Disc - 850hp/tq - ~$1000 (no chatter)
- 12" Ceramic Twin Disc - 1250hp/tq - ~ $1100 (no chatter)
- 12" Iron Twin Disc - 1450hp/tq - ~$1200 (minimal chatter)
- 11" Ceramic Twin Disc - 1550hp/tq - $1500 (minimal chatter)
- 11" Iron Twin Disc - 1750hp/tq - ~$1600 - (minimal chatter)
I just got back from driving a car we put our Ceramic 12" twin disc in and all I can say is HOLY SH*T!!!!! This thing will be rated at 1250hp/tq and me and six other guys here at the shop could NOT get this thing to chatter! It's as smooth as a stock clutch, hell we were letting out the clutch at idle without chatter! The best part is you'll get all this and it will hold HUGE power!
We're excited to say the least! 19 months and investing way too much money to even think about and we finally nailed it!!!!
I'll post this on more forums and on Monday expect concrete pricing, timeline of production, and PICTURES!
Steve A.
Trending Topics
07-18-2010, 07:17 PM
#14
TECH Regular
Join Date: Dec 2008
Location: New York, NY
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
07-19-2010, 04:57 PM
#20
Awesome, Steve! I know you're excited for this project to come to fruition! Looking forward to putting some into some heavy hitters around here 
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
