Can't get into 1st or reverse??
#1
Staging Lane
Thread Starter
Join Date: Nov 2006
Location: GA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Can't get into 1st or reverse??
Hey guys,
I've got about 40k miles on this clutch and about 12k on the Tick M/C. No issues except high rpm shifting troubles, which the Tick really improved.
All of a sudden I can't get it into 1st or reverse, with the motor on or off. I've bled and re-bled the clutch and have a very firm pedal. There is a screeching sound coming from either the PP or the slave, when the pedal is pushed and released.
I removed the cover and took this pic with the pedal all the way down, to check for release:
How much clearance do I need between the clutch and flywheel? I can't rotate the clutch freely with the pedal depressed.
I've beginning to wonder about the pilot bearing. Any help would be greatly appreciated.
Thank you
I've got about 40k miles on this clutch and about 12k on the Tick M/C. No issues except high rpm shifting troubles, which the Tick really improved.
All of a sudden I can't get it into 1st or reverse, with the motor on or off. I've bled and re-bled the clutch and have a very firm pedal. There is a screeching sound coming from either the PP or the slave, when the pedal is pushed and released.
I removed the cover and took this pic with the pedal all the way down, to check for release:
How much clearance do I need between the clutch and flywheel? I can't rotate the clutch freely with the pedal depressed.
I've beginning to wonder about the pilot bearing. Any help would be greatly appreciated.
Thank you