Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Questions about a swap and using my t-56

Thread Tools
 
Search this Thread
 
Old 04-27-2011, 06:43 PM
  #1  
Teching In
Thread Starter
 
GM02ss's Avatar
 
Join Date: Feb 2011
Location: Sj
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default Questions about a swap and using my t-56

so im about almost ready to put in my motor and i have a question regarding my t-56..i have a 02 ss and im putting in a lq9 engine from a 06 denali my question is can i still use the sam t-56 tranny that i was using on my ls1?if anyone knows please let me know if i can thanks.
Old 04-27-2011, 08:25 PM
  #2  
jmd
TECH Addict
iTrader: (4)
 
jmd's Avatar
 
Join Date: May 2002
Location: T56th Street, Aridzona
Posts: 2,561
Received 26 Likes on 24 Posts

Default

Yep.

The input shaft is the right length.
The crank is the same depth from the back of the block.
The starters interchange.

You need the small dia. pilot bushing or bearing (02 SS application)




All times are GMT -5. The time now is 11:23 PM.