WTT my complete BUILT t56 setup for your BUILT 4l80e setup! Austin, Tx
#1
Launching!
Thread Starter
iTrader: (47)
Join Date: Apr 2008
Location: Austin, TX
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
WTT my complete BUILT t56 setup for your BUILT 4l80e setup! Austin, Tx
I've been kicking around the idea of doing a 4l80e conversion on my car since the F1A build began. Although this is a guaging interest thread, I'm no bullshitter and when I say I'm going to do something I WILL get it done. I've got a great trader rating here on tech and there are plenty of guys that can vouch for me as a seller. With that said, I've got a rough estimate of what I think my setup is worth, and also what a stout 4l80e setup is as well. What I'm looking for is something that's built and ready for 1000 hp. No junk please.
Honestly, I'd rather not just sell my setup outright and try piecing together my own conversion. I'd rather do a complete swap with someone, but if the price is right I'd take into consideration selling it all together.
My setup will include a Tick Stg 2 t56 that shifts flawlessly. No grinding or anything of that nature. I got it from a member here on the board (Sluggish) -great guy btw. Also a Spec 3 clutch and flywheel. (rated@832 ft lbs/tq) And everything needed for a complete 6 speed swap. Even with my current 408/F1-A setup, this setup has held up like a champ.
Depending on the circumstances, if I have to put money up for a beast auto setup I can, but at the same time if I feel the trade is unfair you may have to send some $ my way.
No 4l60e's, th400's, or th350's!
Best way to get ahold of me is by pm or text/call 832-896-0935.
Thanks in advance,
Kody
Honestly, I'd rather not just sell my setup outright and try piecing together my own conversion. I'd rather do a complete swap with someone, but if the price is right I'd take into consideration selling it all together.
My setup will include a Tick Stg 2 t56 that shifts flawlessly. No grinding or anything of that nature. I got it from a member here on the board (Sluggish) -great guy btw. Also a Spec 3 clutch and flywheel. (rated@832 ft lbs/tq) And everything needed for a complete 6 speed swap. Even with my current 408/F1-A setup, this setup has held up like a champ.
Depending on the circumstances, if I have to put money up for a beast auto setup I can, but at the same time if I feel the trade is unfair you may have to send some $ my way.
No 4l60e's, th400's, or th350's!
Best way to get ahold of me is by pm or text/call 832-896-0935.
Thanks in advance,
Kody
Last edited by vicouSS00; 02-29-2012 at 04:47 PM.