wannabfast

iTrader: (3)

Does anyone have a picture of where the dowels are located at? My transmission is not coming out and was told that the dowels are probably corroded is why. Any help appreciated.
thanks

autogeek23

iTrader: (13)

on the sides i think. pull really hard.

i googled it.

wannabfast

iTrader: (3)

not only did i pull really hard i put my feet on it and basically kicked it

thesource

iTrader: (60)

Are you trying to pull it with the bell housing or are you unbolting it from the bell housing?

wannabfast

iTrader: (3)

by unbolting the bell housing.

thesource

iTrader: (60)

Unbolt it the transmission from the bell housing leaving the bell housing bolted to the engine.

studderin

iTrader: (28)

yup thats easier to do.

I took a pic without the bell on, just the back of the motor, that might help you. You can see the shape of the motor and were the dowels and bolts are. There right on the sides of the block at 3 and 9 o'clock

https://ls1tech.com/forums/manual-tr...-teh-diet.html