99french

iTrader: (7)

Finally got back out to the track. Figured out clutch is causing me to roll, so I went to adjust it since I have a tick Mc to find out no adjustment left. And the car still rolls. Well it's had a good run at about 20k-25k miles and taken out its fair share of parts along the way. Still holding great just engaging prematurely. I guess this years racing season is over for me so I can still enjoy to drive it some. Great product and I will buy another

SNLPerformance

iTrader: (15)

Let me know what parts you need and well get you going again

TheBlueKnight

iTrader: (4)

So if it's engaging prematurely and the Tick master is adjusted as far out as it will go does that mean the PP is the culprit?

99french

iTrader: (7)

I called Martin at tick performance and pretty much boils down to the disk is about dead and since there isn't much material left there is only so much work that the pressure plate can do with what it has to work with. It's still handling track use and street use just I keep rolling through the beams.