CobraBob's Shifter Gaskets!!
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Oct 2012
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
CobraBob's Shifter Gaskets!!
Buddy of mine used to be an F-body guy but recently purchased an 03 Cobra. He was in the market for a new shifter and asked if I had heard of Cobrabob gaskets. Apparently these shifter gaskets are all the rave over on the Mustang forums. He convinced me to spend the $15 on a set and WOW. The difference is amazing. When I was installing it, I thought it was kind of a joke how thin the rubber is and how it wants to squish out from under the shifter base. I had to tighten the stick down so much that it nearly compressed the gasket right out. On the first test drive, all my doubts were quickly put to rest. I could immediately tell a difference and on the highway, I can say the noise is reduced 75%. I am using the Pro 5.0 shifter. Must get a set!
Last edited by LopeyZ; 10-01-2014 at 09:48 PM.
#7
TECH Senior Member
iTrader: (18)
For the record, I had one in my cobra and it was great. I had clutch issues and had to pull the shifter like 3 times within two weeks so it made the process that much more painless. No more RTV.....