AlexLSx7

Anyone know the slave I need to use for an Mcleod RXT Street Twin on an LS3 with a TR6060. I used a brand new Dorman CS360058 and it failed on bleeding.

I found a GM one for a Camaro which is meant to be the right one but that was like $300+, is that right?

SLOW SEDAN

iTrader: (13)

Why not get an adjustable one from Tilton since they adjust to any height you need and work great. They aren't much if any more then stock units, keep the fluid cleaner, and are rebuildable.

AlexLSx7

I will have a look at them, do summit sell them?

SLOW SEDAN

iTrader: (13)

Yes summit, jegs, most places have them in stock. We've used the 6000 series with the McLeods just make sure you get the correct bearing.

fastcars95

iTrader: (9)

I used an OEM one without any issues. 3 years at 800whp and still working as it should.
I'm pretty happy with the clutch. No signs of slip but it's does get a little grabby when its pushed (heated up)