Anyone using McLeod Iron Disk?
01-08-2002, 10:06 AM
#1
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Boynton Beach FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Anyone using McLeod Iron Disk? Was browsing on Thunders Website and saw that in McLeods line up for only $420 and uses stock hydralics. So i was wondering if anybody has had an success with it or has tried it. All info would be greatly appreciated.
[ January 08, 2002: Message edited by: 01 NBM DEMON ]</p>
[ January 08, 2002: Message edited by: 01 NBM DEMON ]</p>
01-08-2002, 11:06 AM
#2
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone using McLeod Iron Disk? I didn't know it was released yet. I believe I have the first or second test clutch out there. We have 2 locally here (mine and a C5 vette) and both are working great.
One word of caution, this thing grabs and grabs hard. Jerky starts are very easy and launching it can be a bit tricky since it snaps soooo hard. But it HOLDS <img src="gr_stretch.gif" border="0">
One word of caution, this thing grabs and grabs hard. Jerky starts are very easy and launching it can be a bit tricky since it snaps soooo hard. But it HOLDS <img src="gr_stretch.gif" border="0">
01-08-2002, 03:21 PM
#3
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Boynton Beach FL
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone using McLeod Iron Disk? Good to hear it holds alot of power. It is exactly what i am looking for power i should be putting down on the NOS thanks for the info guys
01-09-2002, 12:58 AM
#4
!Dial-up Director
Re: Anyone using McLeod Iron Disk? I've had mine in for a couple of months. It has held up fine so far to rev limiter dumps on slicks. Like Fireball said it grabs HARD! Jason99TA is also runing this clutch.
I also have a Mcleod Adjustable master cylinder.
Justin
[ January 08, 2002: Message edited by: Jsears8 ]</p>
I also have a Mcleod Adjustable master cylinder.
Justin
[ January 08, 2002: Message edited by: Jsears8 ]</p>
