Unusual clutch sticking to floor problem - does it always
08-29-2006, 08:31 PM
#1
Unusual clutch sticking to floor problem - does it always The trans was recently rebuilt and the slave replaced while it was apart. Ever since the clutch pedal tends to stay down after being held in for >20 seconds. It does not have to be driven hard to stick.
The engagement point of the clutch also settles towards the floor the longer I hold in the clutch, to the point it was difficult to take out of gear while still running.
I am assuming the master needs replaced, but wanted to check with the experts. This is on my basically stock '98 Z28.
The engagement point of the clutch also settles towards the floor the longer I hold in the clutch, to the point it was difficult to take out of gear while still running.
I am assuming the master needs replaced, but wanted to check with the experts. This is on my basically stock '98 Z28.
