Mark A. Rogalski

iTrader: (1)

I'm looking for a premium **** like the C6 vette has with the pattern on the top of the ****. Has anyone seen any leather wrapped like this that will fit the shaft for the F-Body. I bought the vette one in gray and they are not screw on.



There are a ton of those ***** and billet ones. Seems like a billion really nice ones for BMW's by MOMO and such.. but reverse pattern *** backwards.

myfast70

iTrader: (38)

Keep me posted if you find one. I wouldn't mind one either

Jimmard

iTrader: (12)

Do a search, someone sells an adapted C6 **** to fit on a standard F-body shifter. Somebody mentioned it a while ago and put one in his trans am.

Jimmard

iTrader: (12)

edit: here ya go https://ls1tech.com/forums/showthrea...ght=shift+****


Here's a picture of it:

Mark A. Rogalski

iTrader: (1)

Jimmard,

Thank you. Your information is probably the top 2 or 3 pieces of information I have ever gotten from my posts. Guess that tells you how bad I want one.

Jimmard

iTrader: (12)

lol no problem man

98ws61le

they sells the modded ones on ebay

Mark A. Rogalski

iTrader: (1)

Thank you . It's the same guy as above site.

Jake the SSnake

iTrader: (11)

The c6 **** WILL screw on the fbody shifter. The I.D of the **** is barely smaller than the O.D of the shifter,if that makes sense.Just put the **** on top of the stick as straight as you can and thread it on.The threads from the stick act as a tap.Use a strap wrench and it will be tight.Heres one that I sold last year,hurst/ws6store ss/c6 ****.

nyteryder167

iTrader: (10)

I have the C6 **** I bought from a vendor (not a sponsor) and I love it. It was kinda pricey, but I love the feel and especially the look. Not too many f-bods have it.