ssblackss00

iTrader: (14)

Ok I had a ls7 clutch kit, new slave 01+, new master, and drill mod installed in my 2000 SS and it is very notchy now and at a dead stop with the car running it will not go into 2 3 or 5th gear but it will when the car is moving. and it is very hard to get it to reverse I have to smack it in, if I try and push it in even with both hands it will not go. Will this go away after a while or does it need the be bleed. Any help would be GREAT

Z28/2002

iTrader: (27)

Bleed it first

camarojunky74

iTrader: (14)

sounds like your clutch is not disengagin all the way, like this guy said try bleeding it first, if no luck, post again

SSDoubleK

iTrader: (100)

Gotta make sure you bleed the system alot, also did you invest in one of those great remote bleeders? I will not do a install without one. Also with the LS7 clutch, did you install a shim?

ssblackss00

iTrader: (14)

no shim but im going to bleed it right now

TheLS1Kid

iTrader: (12)

Yea try bleeding it more.

Nice avatar Z28/2002!

o2camaross

iTrader: (2)

^^^I was thinking the same thing^^^^

skyhighsami

iTrader: (8)

Z28/2002 do you have any more pics of the person in your avatar? WOW!!

ssblackss00

iTrader: (14)

Ok well bleed it manually with to of us one under and the other at the pedal and no air cam out what so ever so im going to get a mityvac in the morning unless anyone thinks other wise?

ssblackss00

iTrader: (14)

ok well i figured the problem out the the reverse lock out was plugged into the the skip shift could this do any damage

camarojunky74

iTrader: (14)

i cant imagine unless you drove it like this for a long time

ssblackss00

iTrader: (14)

hundred and 124.3 miles to be exact so what you think?

camarojunky74

iTrader: (14)

i think you will be fine, if your paranoid change your trans oil, that should take any guilt away for me

Z28/2002

iTrader: (27)

Yeah but I'm not sharing.


She is an old gf of mine