how is traction with 4.10's on the streets??
 

i have a head and camed 01 ws6 with 424.1hp & 407.4tq.(old set up) with 3.73's i can heat the nittos on the street and lonch at 2,500rpm's with NO spin and 3,000 with little spin. i want to switch to 4.10's how will my traction change? will it be the same or worse? THANKS, mike c.

Re: how is traction with 4.10's on the streets??
 

UH u Dont know :bomb:I had 4.10s for a summer also had 5 sets of tires went to 4.56s bad,real bad had to machine part of the block that holds the axles apart

Re: how is traction with 4.10's on the streets??
 

i forgot,i also have a 12bolt.

Re: how is traction with 4.10's on the streets??
 

my 98 with a 12 bolt (4.11's), macs, and a lid could lite the 245 khumo's i had right up...

i might keep the gears you have just to get a bit of traction on the streets..

Re: how is traction with 4.10's on the streets??
 

Traction will be worse, guaranteed!

Re: how is traction with 4.10's on the streets??
 

Yeah but you will have more fun with the 4.11s!

Re: how is traction with 4.10's on the streets??
 

street tire traction w/ 4.10 gears hah hah. you'll be doing alot of 40 mph roll races. I break my 275 bfg KD's loose at 30 but once you get a grip it's awesome but with drag radials it will be sweet :burn: :drive:

Re: how is traction with 4.10's on the streets??
 

I break my 295s loose with 3.75s in 1st and 2nd.....don't even want to think about the "fun" I would have trying to hook up with 4.10s.... :)

Re: how is traction with 4.10's on the streets??
 

i have nittos. with 430hp and 3.73's they don't really bust loose,i hook good. thats why i thought with 4.10's it would'nt be to bad.

Re: how is traction with 4.10's on the streets??
 

I have no traction, 1st through 3rd. Just got some Nittos. It's damn fun though!

Re: how is traction with 4.10's on the streets??
 

thanks for all the replies. it sounds like the 4.10's gets no traction. i'll just keep my 3.73's,i really dont have traction problems and dont want to get any. thanks all.