98hc4mula

iTrader: (5)

Can anyone tell me if I can make up the vent tube for the tranny with a hose and a valve?

if so, What kind of valve do I need. I need to do this since my tranny does not have one.

Also I need to know the part number for the belt using underdrive pulley (ASP)


thanks

ls1slow

iTrader: (1)

The belt size is 760K6 for accusey and 378K4 for a/c

98hc4mula

iTrader: (5)

THANKS
so If I still have AC then use belt 378k4....what brand or does it matter, is that a generic part number?

calhoon

iTrader: (6)

As for the vent tube. A rubber hose and clams will work fine. I don't know what you mean about a valve. There should not be a valve that blocks air flow- the reason for a vent. A simple"jiggle cap" fitting like what is used on diffs will work.