best street clutch/flywheel with minor mods done to car
06-24-2008, 10:04 AM
#1
TECH Addict
Thread Starter
iTrader: (6)
Join Date: Jul 2007
Location: Ringoes/Flemington, New Jersey
Posts: 2,852
Likes: 0
Received 1 Like
on
1 Post
best street clutch/flywheel with minor mods done to car Well, My stock clutch i believe is slipping because the rear main is leaking onto it. It randomly slips when I go from first to 2nd. Most of the time when i do a burnout or something. Now recently 2nd gear grinds when i first move the car, and randomly when i downshift and go to give it some gas...
I have a rebuild T56 with 200 miles in my garage, so I do not need a new trans. I just need to decide on what kind of clutch I should get. My cars motor is stock xcept for the TB coolant bypass and the TPIS air foil, and green air filter. I have SFCs, Panhard bars, and... thats it! I was wondering what have u guys used with similar mods to mine. I was thinking just grind the stock flywheel, and go with what clutch? any info appreciated
I have a rebuild T56 with 200 miles in my garage, so I do not need a new trans. I just need to decide on what kind of clutch I should get. My cars motor is stock xcept for the TB coolant bypass and the TPIS air foil, and green air filter. I have SFCs, Panhard bars, and... thats it! I was wondering what have u guys used with similar mods to mine. I was thinking just grind the stock flywheel, and go with what clutch? any info appreciated
