Description:

Craigslist posting: https://fresno.craigslist.org/cto/d/...701116593.html

Project car from college no longer gets attention. 75k miles on the body and less than 5k miles on the rebuilt motor and transmission. Hoping to find it a home for someone else to pick up where I left off.

NOT California street legal. It passed inspection in Texas back in 2012. Will not pass smog. It's been in the garage in California ever since after I moved here. It's been sitting in the garage for about 5 years now. I turn it on at least once a month and shift through the gears.

Dyno Tested: 400rwhp / 430rwtq

Clean title

Mods List:
LS2 6.0L 364ci
ls6 intake
K&N filter
SLP lid
patriot 660 lift springs with titanium retainers and keepers
manly push rods
243 heads
lunati f1 cam with 227/228 duration .595/.598 112LSA
obx stainless steel longtube headers
TSP Rumbler X-pipe w/ moroso spirals dumped at the axle - Sounds mean, but not too mean!
3600 yank stall
B&M trans cooler
3.73 gm gears in rear end
KONI Shocks
BMR k-member & sway bars
BMR adjustable poly panhard rod
Hawk rotors and brake pads

Imperfections:
Circular hole in the driver side door (Interesting story... From a semi-truck on the highway)
Passenger side front quarter panel / bumper / hood damage from a fender-bender
Small oil pan leak. Been wanting to put a new oil pan gasket in, but it hasn't been a priority lately
Power windows are out of juice
Needs an alignment after fully replacing all suspension components
Brake lines need to be bled

Would need to pick the car up with a flat-bed since it isn't road worthy at the moment. No rush to sell. Let me know if you want pics of anything in particular and I can send them as well.