6.0L LQ4 and 4L80E
02-28-2019, 08:55 AM | Replies: 8 | Views: 1646
-
Price
$1,500
- Location Parkersburg, IA, 50665, USA
Description:
I have a 6.0L LQ4 and a 4L80E pulled in the fall of 2017 from a 2001 GMC 2500 truck 2wd. Truck had about 220,000 miles and was running and driving when engine and transmission were pulled. I had planned to use the combination in a project but as happens plans changed. I pulled everything I thought I might need including the engine harness and PCM. One of the fuel rails cracked while the engine was being removed. Everything has been stored inside since pulled. I had pressure washed the engine while it was still in the truck prior to pulling. Since everything was pulled it appears mice have done a bit of chewing on the wire harness.
I'm not interested in shipping the parts. I don't really know what everything is worth so PM with questions or an offer if you're interested. I can provide more photos if necessary. Thanks
I'm not interested in shipping the parts. I don't really know what everything is worth so PM with questions or an offer if you're interested. I can provide more photos if necessary. Thanks
Last edited by Steve L.; 03-09-2019 at 01:53 PM.
Reply
Trending Topics
01-06-2020, 09:16 PM
#8
Teching In
Join Date: Aug 2017
Location: Guthrie Oklahoma
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I purchased this motor/trans combo and what did I find? A bent piston rod and water/rusted cylinder wall,,,,, was advertised as running when pulled,,, of course no response from seller.
Its a chance you take but this is just an FYI for anyone else buying from Steve
Its a chance you take but this is just an FYI for anyone else buying from Steve