Brodix BR7 Heads, CNC porting by Frankenstein & Crower Stainless Shaft rockers
For SaleEngine - Internals
-
Price
$3,000
- Location Milwaukie, OR, 97267, USA
- Condition Used
Description:
I've had these for a couple years.
Just replaced the exhaust valves over the winter with new Manley Severe Duty valves (3 passes on them)
New Pac 1238x springs (3 passes on them)
I have a set of 1237x springs I could put back on it, they were run for one season and checked within a couple lbs advertised.
70cc chamber (this is what they were new, I've decked about .01 since new)
410cfm @ .650 & 257cfm @ .650
Time-serts installed in the rocker arm threads.
Took the car out two weeks ago and lifted heads, torched the drivers head.
Had it repaired by the best guy in town, he's a wizard when it comes to heads.
Before and after photos shown in photos 6 & 7
Fresh deck on both heads.
Crower Stainless Shaft Rocker setup, 1.7 ratio, like new.
This setup would set you back $5200 new
