Wiseco Professional Series forged Pistons LS1, 5 7, 5.3
For SaleEngine - Internals
01-26-2020, 04:59 PM | Replies: 8 | Views: 1818
-
Price
$650• OBO • Trade
- Location Petal, MS, 39465, USA
- Condition New
- Compatibility
Make | Model | Year |
---|---|---|
Chevrolet | Camaro | 1998 - 2002 |
Description:
I bought them with the intention of building a stroker motor but changed directions. Perfect to rebuild your LS1 of bore out a 5.3. These are 5.7 bore pistons. They sell for $800, first $650 gets them. Will consider trades, looking for an Holley Terminator EFI kit, (will add cash), injectors, cathedral port intake, nitrous kit parts, 7.400 mly pushrods and rockers with trunion upgrade.
Last edited by Basco; 01-28-2020 at 02:44 PM.
Reply
The following users liked this post:
INDWIND34 (01-28-2020)
#6
https://www.summitracing.com/parts/w.../applications/
Here you go. The link to the pistons.
Although the applications says a 6.098 Rod, the pin says .927 which means an aftermarket 6.125" Rod as he said.
But, you did say Stroker, these look to be for a stock stroke, 3,622" from the CH.
Is this correct?
It's a good deal and I'm a little interested myself pending another offer I have on here that I'm waiting back on.
Good LucK!
Here you go. The link to the pistons.
Although the applications says a 6.098 Rod, the pin says .927 which means an aftermarket 6.125" Rod as he said.
But, you did say Stroker, these look to be for a stock stroke, 3,622" from the CH.
Is this correct?
It's a good deal and I'm a little interested myself pending another offer I have on here that I'm waiting back on.
Good LucK!
The following users liked this post:
Basco (01-29-2020)
#7
On The Tree
Thread Starter
https://www.summitracing.com/parts/w.../applications/
Here you go. The link to the pistons.
Although the applications says a 6.098 Rod, the pin says .927 which means an aftermarket 6.125" Rod as he said.
But, you did say Stroker, these look to be for a stock stroke, 3,622" from the CH.
Is this correct?
It's a good deal and I'm a little interested myself pending another offer I have on here that I'm waiting back on.
Good LucK!
Here you go. The link to the pistons.
Although the applications says a 6.098 Rod, the pin says .927 which means an aftermarket 6.125" Rod as he said.
But, you did say Stroker, these look to be for a stock stroke, 3,622" from the CH.
Is this correct?
It's a good deal and I'm a little interested myself pending another offer I have on here that I'm waiting back on.
Good LucK!
Last edited by Basco; 02-02-2020 at 08:45 PM.